| Model | NB-eLoop B12-P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 0–2000 RPM |
| Max airflow | 77.93 CFM |
| Max noise | 28.4 dBA |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
More Noiseblocker fans · All 120mm models · Browse the full fan database
About the Noiseblocker NB-eLoop B12-P Fan
The Noiseblocker NB-eLoop B12-P is a 120mm, 25mm-thick fan with a 4-pin PWM connector, so it can be speed-controlled by the motherboard or a fan controller. Its 0 to 2000 RPM range means it can stop entirely at low duty and ramp up when cooling demand rises. The rated 77.93 CFM suggests strong airflow, which suits case ventilation and open-airflow heatsinks more than dense radiators or tight filters where static pressure matters more. Noise is listed at 28.4 dB(A), so expect audible operation near the top of the range.
Mounting follows the standard 120mm, 25mm format, so it fits common case and cooler positions. The fan is black with no lighting. The data does not list static pressure, bearing type, cable length, release year or price, so those details cannot be confirmed here. Buyers should check the 4-pin PWM header on their board and confirm 25mm clearance before ordering.
Frequently asked questions
Is the Noiseblocker NB-eLoop B12-P quiet?
The manufacturer rates it at 28.4 dB(A). That is the listed noise figure, and since the fan runs from 0 to 2000 RPM via PWM, lower speeds should reduce noise, but no per-speed noise data is provided.
What is the NB-eLoop B12-P best used for?
With 77.93 CFM and 2000 RPM maximum, it suits case ventilation and airflow-focused cooling. The data does not list static pressure, so its performance on dense radiators or restrictive filters cannot be confirmed from the specs.
Does the NB-eLoop B12-P have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It connects through a 4-pin PWM header, so lighting control is not part of this model's specification.















