Two 120mm fans, two different design briefs
The Noiseblocker NB-Multiframe M12-3 and the Montech AIR FAN P120 are both 120mm × 25mm fans with near-identical airflow claims and the same 27 dBA noise rating, but they are built for opposite ends of the market: the Noiseblocker is a fixed-speed 1800 RPM German fan from a company whose main business is industrial and municipal acoustic work, while the Montech is a variable-speed 600–1500 RPM fluid-dynamic-bearing fan aimed at PC builders. That single difference — fixed high speed versus a broad PWM-style range — decides which fan belongs in which system.
Spec comparison
| Spec | Noiseblocker NB-Multiframe M12-3 | Montech AIR FAN P120 |
|---|---|---|
| Size | 120 mm | 120 mm |
| Max airflow | 72.98 CFM | 73 CFM |
| Max pressure | — | 1.71 mmH₂O |
| Max noise | 27.1 dBA | 27 dBA |
| Max speed | 1800 RPM | 1500 RPM |
| Bearing | — | Fluid Dynamic Bearing |
| Lighting | None | None |
| Price | — | — |
Airflow and static pressure
The headline numbers look like a tie: 72.98 CFM for the Noiseblocker against 73 CFM for the Montech. That is a rounding difference, not a performance gap — but it is a gap in how those figures are reached. The M12-3 hits its 72.98 CFM at a fixed 1800 RPM, so the airflow figure describes one operating point only. The full Montech AIR FAN P120 specs list a 600–1500 RPM range, and 73 CFM is the top of that range; at lower settings the fan moves proportionally less air. If you want a fan that can be turned down without a controller, the Montech is the only one of the two that offers it.
Static pressure is where the published data is asymmetric. Montech publishes 1.71 mmH₂O for the P120. Noiseblocker’s Multiframe line does not publish a static-pressure figure for the M12-3 in the specs given here, so no direct comparison is possible — and none should be assumed. What can be said is directional: a fixed 1800 RPM fan with a closed-loop bionic blade tip (Noiseblocker’s BionicLoopFan design, which closes the blade tips to reduce tip vortex) is positioned by the manufacturer as a general-purpose case and heatsink fan, not as a radiator specialist. The P120’s 1.71 mmH₂O is a modest, honest number typical of a slim 25mm case fan; it is not a high-pressure radiator fan either. For open case airflow — front intakes, rear exhausts, top exhausts — both figures are adequate. For dense radiators or thick heatsinks, neither fan’s published data marks it out as the pressure-optimised choice, and buyers should treat both as airflow-first designs. See the 120mm fan database for fans with explicitly higher published pressure figures.
Noise and bearing
Both fans are rated at 27 dBA, and the honest reading is that these are not equivalent measurements. Noiseblocker states that its noise values are TÜV-certified — the company’s editorial position is that its published figures are real measured data rather than marketing numbers, and its Low-Noise-Development laboratory includes a dedicated listening room and psychoacoustic tuning work. That does not make 27.1 dBA quieter than 27 dBA; it makes the Noiseblocker figure more likely to be comparable across products. Montech’s 27 dBA carries no such certification claim in the material available.
The more concrete difference is the bearing and the speed. The Montech uses a fluid dynamic bearing, a sealed oil-film design that is generally specified for long service life and low wear at varying speeds. The Noiseblocker’s Multiframe line is built around Noiseblocker’s own bearing and drive electronics, with a polycarbonate (Bayer Makrolon) rotor chosen for dimensional stability. At 1800 RPM fixed, the M12-3 will always run at its loudest published point; the P120 at 600 RPM will be substantially quieter than its 27 dBA rating, simply because that rating is taken at the top of its range. For a quiet build, the ability to drop to 600 RPM matters more than a 0.1 dBA difference on paper.
Which should you buy?
- Quiet builds: the Montech AIR FAN P120 — its 600 RPM floor lets you tune noise down in a way the fixed-speed Noiseblocker cannot.
- Radiators: neither is a dedicated pressure fan; if forced to choose on published data, the Montech’s stated 1.71 mmH₂O at least gives you a number to work with, while the Noiseblocker publishes none.
- Budget: the Montech AIR FAN P120 — a variable-speed FDB fan covering a full RPM range is the more versatile purchase per unit, and the Noiseblocker’s industrial-grade engineering is priced for a market that is not budget PC building.
Where each one wins
The Noiseblocker NB-Multiframe M12-3 specs wins on measurement credibility and design intent: TÜV-certified noise figures, a closed-tip bionic blade, a polycarbonate rotor, and a manufacturer whose core business is acoustic engineering for data centres and infrastructure. If you want a fixed-speed fan whose 27.1 dBA you can trust as a real number, it is the stronger pick.
The Montech AIR FAN P120 wins on flexibility and bearing specification: a 600–1500 RPM range, a published static-pressure figure, and a fluid dynamic bearing — all in a fan designed for the PC market rather than adapted to it. For anyone building or upgrading a desktop, it is the more practical component. Browse the full fan database to compare both against the wider 120mm field.
Bottom line
Buy the Montech AIR FAN P120 for a PC build that needs tunable speed and a modern bearing; buy the Noiseblocker NB-Multiframe M12-3 only if a certified, fixed-speed 1800 RPM fan with proven acoustic engineering is exactly what your application calls for.
Comment List (0):
Load More Comments Loading...