| Model | CL-F013-PL14BL-A |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 1000–1000 RPM |
| Max airflow | 55.236 CFM |
| Max pressure | 0.579 mmH₂O |
| Max noise | 20 dBA |
| Bearing | Sleeve Bearing |
| Connector | 3-Pin |
| Lighting | None |
| Colour | Black |
CL-F013-PL14BL-A is a 25 mm thick 140 mm non-LED fan reaching 1000 RPM with 55.236 CFM and 0.579 mmH2O static pressure
More Thermaltake fans · All 140mm models · Browse the full fan database
About the Thermaltake Pure 14
The Thermaltake Pure 14 (CL-F013-PL14BL-A) is a 140mm fan with a 25mm thickness and a fixed 1000 RPM speed, so there is no PWM control range to tune. Its 55.236 CFM airflow is the headline figure, while the 0.579 mmH2O static pressure is modest, which points toward case ventilation and open-airflow mounting rather than pushing through dense radiators or restrictive filters. Buyers should treat it as an airflow-first fan.
At 20 dB(A) the rated noise is low for a 140mm fan, though the data does not list a measured test result or a minimum startup voltage. The sleeve bearing is a simple, low-cost design, and the 3-pin connector means the fan runs at a set speed unless your motherboard or controller varies voltage. Colour is black with no lighting. The listing data does not include a price or release year, so check the retailer for current pricing and availability.
Frequently asked questions
Is the Thermaltake Pure 14 a quiet fan?
Thermaltake rates the Pure 14 at 20 dB(A) at its fixed 1000 RPM. That is a low published figure for a 140mm fan, but the data does not include independent measurements, so real-world noise will depend on your case and mounting.
What is the Thermaltake Pure 14 best used for?
With 55.236 CFM airflow and only 0.579 mmH2O static pressure, it suits case intake and exhaust where air moves freely. It is less suited to thick radiators or dense filters, where higher static pressure is usually preferred.
Does the Thermaltake Pure 14 have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan is black. It uses a 3-pin connector rather than a PWM 4-pin header, so speed control depends on voltage regulation from your motherboard or fan controller.
More Thermaltake fans
Thermaltake Pure 14 ARGB Sync Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing 14 RGB Radiator Fan TT Premium Edition
Thermaltake Riing Plus 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Duo 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Quad 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake TOUGHFAN EX 140 ARGB Sync White 3-Fan Pack









