Seven fans called “P12”
Search for ARCTIC’s most popular 120 mm fan and you will find at least seven different products sharing a name that looks almost identical: P12 PWM PST, P12 PWM PST A-RGB, P12 PWM PST CO, P12 Slim, P12 Max, P12 Pro PST and P12 Pro LN. They are not colour variants of one fan. They have different blade geometry, different bearings, different speed ceilings and price tags that differ by more than double.
This article separates the four ARCTIC 120 mm models that matter for most builds, using the manufacturer figures listed in our fan database. No laboratory numbers are implied anywhere below — every specification is an ARCTIC claim, and where ARCTIC does not publish a figure, we say so instead of guessing.
The four models side by side
| Model | Size | Speed | Airflow | Static pressure | Bearing | Lighting | Price |
|---|---|---|---|---|---|---|---|
| P12 Pro PST | 120 × 25 mm | 600–3000 RPM | 77 CFM | 6.9 mmH₂O | FDB | None | €14.49 |
| P12 Max | 120 × 25 mm | 200–3300 RPM | 81.04 CFM | 4.35 mmH₂O | Dual ball | None | Not listed |
| P12 PWM PST A-RGB | 120 × 25 mm | 200–2000 RPM | 48.8 CFM | 1.85 mmH₂O | FDB | 12 ARGB LEDs | Not listed |
| BioniX P12 A-RGB | 120 × 26 mm | 450–3000 RPM | 76 CFM | 6.7 mmH₂O | FDB | 16 ARGB LEDs | €18.90 |
P12 Pro PST — the one to default to
The Pro PST is the 2025 flagship blade on the standard 25 mm frame. ARCTIC rates it at 77 CFM and 6.9 mmH₂O, which is a pressure figure you normally only see on 30 mm thick fans. That combination matters because radiator fins and dust filters are the two places where a thin frame fan usually gives up: the Pro’s pressure number suggests it will not.
The reason this is the default recommendation is not the peak figures, it is the shape of the range. A 600 RPM floor means the fan can idle quietly on a 360 radiator in a living room build, while the 3000 RPM ceiling leaves headroom for a synthetic load run. ARCTIC’s PWM Sharing Technology — a male and female connector on the same cable — lets you chain several of these onto one motherboard header without a splitter, which is genuinely useful for a three-fan radiator. It is also covered by ARCTIC’s six-year warranty.
The honest limitation: ARCTIC does not publish a noise rating for this model, so anyone claiming a specific dB figure for it is quoting something else.
P12 Max — brute force, not finesse
The Max pushes the ceiling to 3300 RPM and 81.04 CFM, but drops static pressure to 4.35 mmH₂O and switches to a dual ball bearing. That is a different product with a different job description: it is the fan you buy when a 240 mm radiator has to hold a high-wattage CPU inside a small case and you would rather tolerate noise than throttle.
Dual ball bearings are the deliberate choice here. They handle heat and continuous duty better than fluid bearings, at the cost of a faint tick that some users notice at low speed. For a workstation that runs eight hours a day, that is a fair trade. For a bedroom build, it is the wrong fan — the P12 Pro PST at 600 RPM will be dramatically calmer at idle.
P12 PWM PST A-RGB — the spec-sheet trap
This is the model that catches people out. It carries the same “P12” name but delivers only 48.8 CFM at 1.85 mmH₂O with a 2000 RPM ceiling. Those are ordinary case-fan numbers, not radiator numbers. If you buy it to sit on top of an AIO because it was the cheapest P12 with a light ring, you are putting a low-pressure fan in a high-pressure job.
Its place is the front intake of a mesh case, where it needs to move air through open space and look good doing it. Twelve addressable LEDs on the hub, FDB bearing, and PST chaining make it a reasonable RGB intake. It is not a cooling upgrade over the plain P12, and it should never be recommended for a dense filter stack.
BioniX P12 A-RGB — the 2026 option, and what you pay for
Launched in August 2026, the BioniX uses a 26 mm frame, 16 addressable LEDs across the hub and both frame sides, and a slot on each side that accepts a Bridge Module or a standard 4-pin PWM / 5 V ARGB adapter. In other words, ARCTIC built a second daisy-chain system on top of the old PST one, and the two are not interchangeable.
Performance-wise it sits within a rounding error of the Pro PST — 76 CFM and 6.7 mmH₂O against 77 and 6.9. So the €18.90 asking price over the €14.49 Pro is not buying airflow. It is buying lighting, a slightly deeper frame for cleaner cable routing, and the modular connection system. Buy it if you are building an RGB system and want the cabling to look deliberate. Skip it if you only care about moving air.
Which one for which build
AIO radiators and dense dust filters
P12 Pro PST. The 6.9 mmH₂O rating is the only figure in this group that clearly belongs on a radiator, and the 600 RPM floor keeps it civil at idle.
Maximum cooling in a small case, noise accepted
P12 Max. Highest ceiling, dual ball bearing, no illusions about acoustics.
Case intake with lighting
P12 PWM PST A-RGB on a budget, BioniX P12 A-RGB if you want the modular cabling and the stronger blade at the same time.
You already own a P12 and are wondering about the Pro
The Pro is a real blade redesign, not a rebrand — the pressure figure roughly triples over the standard P12. If your current P12 is on a radiator and your temperatures are borderline, that is the upgrade with the clearest physical justification in ARCTIC’s line-up.
What to ignore when comparing
Peak CFM numbers are the least useful column in any fan table. A 3300 RPM fan will always beat a 2000 RPM fan on a spec sheet, and it will also sound like a hairdryer. The two numbers that actually decide whether a fan works in your case are static pressure (for radiators, filters and tight mesh) and the lowest speed the fan can hold stably (for idle noise). ARCTIC publishes both for the Pro and the Max; it does not publish noise for either, which is why any dB comparison you read elsewhere should be treated with suspicion.
If you are still deciding between frame sizes rather than models, the 120 mm fan database lists every model we track with its published figures, and the best quiet 120 mm fans guide ranks the same group by published noise. Every ARCTIC model we have on file is listed under the ARCTIC brand page.
FAQ
Is the P12 Pro PST better than the P12 Max?
For radiators and filters, yes — 6.9 mmH₂O against 4.35 mmH₂O, and a much lower idle speed. For raw airflow in an unrestricted case where noise does not matter, the Max’s 81 CFM and 3300 RPM ceiling win. They are different tools.
Can I daisy-chain P12 fans on one motherboard header?
The PST models have a male and female connector inline so several fans can share one header. Check your motherboard’s current rating per header before chaining three or more, and note that the BioniX uses a different modular connection system that is not compatible with PST.
Why does my P12 A-RGB perform worse than my friend’s P12?
Because they are probably not the same fan. The A-RGB version is rated at 48.8 CFM and 1.85 mmH₂O with a 2000 RPM ceiling, while the Pro PST reaches 77 CFM and 6.9 mmH₂O at 3000 RPM. Same name, different blade.
All specifications in this article are manufacturer claims published by ARCTIC and recorded in our fan database. We have not independently measured airflow, static pressure or noise. Product links point to the individual specification pages on Fan Info.
Comment List (0):
Load More Comments Loading...