Fan Reviews

Endorfy Stratus 120 PWM Review: 120mm Fan

Introduction

The Endorfy Stratus 120 PWM is a 120mm × 25mm case fan rated for 200–1400 RPM. It is the retail version of the fan Endorfy ships as stock equipment in its own cases — the Signum 400, for instance, comes with four Stratus 120 PWM ARGB units pre-installed. That origin explains most of what this fan is and is not: it is designed to be cheap enough to bundle by the dozen, quiet enough not to embarrass a case review, and competent enough that most buyers never replace it. It is not a radiator specialist, and Endorfy does not market it as one.

For context, Endorfy is the 2022 successor name to SilentiumPC, the Polish brand behind the Fortis and Regnum lines. The company is based in Sokołów outside Warsaw and positions itself as the European value option: modest prices, quiet-leaning acoustics, and a six-year warranty across much of the range. The Stratus sits below the Fluctus series in the line-up, and that hierarchy matters when reading its specifications.

Specs at a glance

Spec Value
Model Stratus 120 PWM
Brand Endorfy
Size 120 mm
Thickness 25 mm
Speed 200–1400 RPM
Connector 4-pin PWM
Lighting None
Colour Black

What the numbers mean

The 200–1400 RPM window is narrower and lower-ceilinged than the Fluctus 120 PWM, which Endorfy rates at 250–1800 RPM. That is the single most informative figure here. A 1400 RPM ceiling tells you the Stratus is tuned for airflow duty in open case positions rather than for pushing through dense fin stacks. Static pressure scales with the square of rotational speed, so the top of this fan’s range produces meaningfully less pressure than a 1800 RPM design of similar blade geometry. Endorfy does not publish airflow or static pressure figures in cubic metres per hour or pascals for the Stratus, so there is no honest way to quantify the gap — only to describe its direction.

The 200 RPM floor is the more interesting half of the spec. It means the fan can idle at a genuinely low speed, which is where a case fan spends most of its life. A filter-clogged front intake running at 200 RPM will move very little air, but it will also be effectively inaudible, and in a case with positive pressure from multiple intakes that is often the correct trade. The Stratus gives you that low floor without asking you to buy a premium fan to get it.

Endorfy does not publish a bearing type, an MTBF figure, or a peak current draw for the Stratus 120 PWM. This is a deliberate contrast with the Fluctus line, which carries FDB bearings, a 100,000-hour MTBF, and a six-year warranty. The absence of those figures on the Stratus page is not an accident of web design; it reflects where the product sits. Buyers who need a documented bearing life should be looking at the tier above.

Where it fits

Case intake behind a dust filter. This is the Stratus’s natural habitat. At 1400 RPM maximum it has enough headroom to feed a mid-tower with a mesh or foam front, and the 200 RPM floor lets you set a curve that stays silent at idle. Two or three as front intakes with one exhaust is the configuration Endorfy itself builds into its cases.

Budget and family builds. A fan that ships as stock equipment is by definition priced for replacement-in-bulk. If you are building a system where the fan budget is a rounding error against the GPU, the Stratus is the honest choice — it will not be the weak link in a build that was never going to be quiet anyway.

Low-load 240mm and 360mm radiators. With a 1400 RPM ceiling, the Stratus is usable on a thin radiator in a low-TDP system — a 65W-class CPU on a 240mm AIO, for instance — where you never need the top of the fan curve. It is not the right choice for a high-wattage overclocked build on a thick radiator, because the pressure simply is not there.

ITX builds with tight clearance. The standard 25mm thickness and 120mm frame mean it fits where a 30mm or 38mm fan will not. In a small case where the fan is close to a side panel, the lower 1400 RPM ceiling is also an acoustic advantage: you cannot accidentally set a curve that turns it into a leaf blower.

For the full picture of what Endorfy offers across its range, see all Endorfy fans; the Stratus’s position only makes sense against the Fluctus above it.

What it is not

It is not a radiator fan for a high-power system. The 1400 RPM ceiling and the absence of published static pressure figures mean you should not plan a 360mm loop around four of these and expect to hold a 250W load at low noise. If that is your build, the Fluctus 120 PWM — with its higher ceiling and Cybenetics Airflow Titanium certification — is the model Endorfy intends you to buy.

It is not a long-life documented fan. Without a published bearing type or MTBF, you cannot compare its expected service life against an FDB fan with a six-year warranty. If you are building a system you intend to run for a decade, or a machine in a dusty workshop where you want a known bearing specification before you commit, the Stratus is the wrong tier. Endorfy’s own line-up answers that need one step up.

It is also not an ARGB product in this SKU. The Stratus 120 PWM ARGB is the version that ships in the Signum 400 and appears on retail listings; the plain PWM model reviewed here has no lighting. Buyers who want the case-matching look should check the ARGB variant separately.

How it compares

Against the Fluctus 120 PWM, the Stratus trades ceiling and documentation for price. The Fluctus reaches 1800 RPM, carries an FDB bearing, a 100,000-hour MTBF, a six-year warranty, and an airflow certification; the Stratus publishes none of those. The gap is not subtle, and it is the clearest illustration of Endorfy’s two-tier fan strategy. The Stratus is the fan you get for free with a case; the Fluctus is the fan you buy when you care about the spec sheet.

Against other value 120mm fans on the market, the Stratus’s case is its low 200 RPM floor and its standard 25mm frame. Many budget fans bottom out higher and cannot idle quietly. The Stratus can. What it cannot do is match a premium fan’s pressure at the top end, and Endorfy does not pretend otherwise. You can see how it sits against every other 120mm model we track in the 120mm fan database, and the Endorfy Stratus 120 PWM full specs page carries the complete published figures for direct comparison. For cross-brand context, the full fan database covers the wider market.

Verdict

Buy the Stratus 120 PWM if you need a quiet, cheap 120mm case fan for intake duty behind a filter, a budget build, or a low-TDP radiator, and you are content with the 200–1400 RPM window and the absence of a published bearing life. Do not buy it if you are cooling a high-wattage radiator, building for a decade of service, or want a documented FDB bearing and warranty — in those cases the Fluctus 120 PWM is the correct Endorfy product, and the Stratus is simply the tier below it. It is a competent stock fan sold at retail, and that is exactly what it should be judged as.

Related fans

No description....

取消回复

Comment List (0):

Load More Comments Loading...

Further Reading:

Phanteks Launches T30-120 High-Performance Fan, Redefining Cooling Efficiency Standards

The renowned PC hardware brand Phanteks has officially released the PH-F120T30 (T30-120) high-performance cooling fan, garnering significant attent...

ahuahua
2025-10-21

SilverStone Shark Force 160 ARGB Fan: 160mm Cooling with 140mm Mounting

SilverStone Shark Force 160 ARGB Fan: 160mm Cooling with 140mm Mounting160mm diameter, 160 CFM airflow, 140mm mounting compatibilitySilverStone tod...

ahuahua
2025-10-27

ASUS ROG Launches STRIX XF120 “Wind God” Fan: Magnetic Levitation Technology Redefines Silent Cooling Performance

TAIPEI, TAIWAN – ASUS Republic of Gamers (ROG) today announced the launch of its first standalone cooling fan, the ROG STRIX XF120, designed to compet

ahuahua
2025-10-27

Noctua Launches Next-Generation 120mm Flagship Fan: NF-A12x25 G2, with Significant Improvements in Quietness and Performance

The Austrian cooling specialist's latest offering sets a new benchmark in noise reduction and cooling efficiency.

ahuahua
2025-10-25

SilverStone Releases Industrial-Grade Fan FHL120: LCP Blades and Dual Ball Bearings for High Static Pressure Cooling

SilverStone Releases Industrial-Grade Fan FHL120: LCP Blades and Dual Ball Bearings for High Static Pressure CoolingOctober 27, 2025 — SilverStone ...

ahuahua
2025-10-27
    返回顶部