| Model | CO-9050136-WW |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 400–1500 RPM |
| Max airflow | 47.73 CFM |
| Max pressure | 1.46 mmH₂O |
| Max noise | 22.6 dBA |
| Bearing | Hydraulic |
| Connector | 4-pin PWM + 3-pin RGB |
| Lighting | ARGB |
| Colour | White |
SP120 RGB ELITE is a 25 mm thick 120 mm fan reaching 1500 RPM with 47.73 CFM and 1.46 mmH2O static pressure
More Corsair fans · All 120mm models · Browse the full fan database
About the Corsair iCUE SP120 RGB ELITE 120mm PWM Fan Single Pack (White)
The SP120 RGB ELITE is a 120mm by 25mm PWM fan with a 400 to 1500 RPM range, 47.73 CFM airflow and 1.46 mmH2O static pressure. That combination points to a balanced fan rather than a pure airflow or pure pressure design: the static pressure figure suits pushing air through a radiator or a dust filter, while the airflow figure keeps it usable as a general case fan. Buyers should not expect a high-pressure specialist, because 1.46 mmH2O is modest.
Noise is rated at 22.6 dB(A), which is a low figure but is measured at the fan's rated conditions rather than at every speed, so expect quieter running near the 400 RPM minimum. The hydraulic bearing is a sealed, low-maintenance type. Mounting is standard 120mm with 25mm thickness, and the 4-pin PWM connector handles speed control while a separate 3-pin RGB header drives the ARGB lighting. The data does not list a price or release year.
Frequently asked questions
Is the Corsair iCUE SP120 RGB ELITE quiet?
Corsair rates it at 22.6 dB(A) across its 400 to 1500 RPM range. The 400 RPM minimum lets you run it slowly for lower noise, but the data gives only the single rated figure, not noise at each speed.
Is this fan better for a radiator or a case?
Its 1.46 mmH2O static pressure and 47.73 CFM airflow make it a balanced choice. The pressure figure supports radiator and filter use, while the airflow figure keeps it viable as a case fan. It is not a high-pressure specialist.
What connector and size does the white SP120 RGB ELITE use?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for speed control plus a separate 3-pin RGB connector for the ARGB lighting, so both headers are needed.
More Corsair fans
Corsair iCUE SP120 RGB ELITE 120mm PWM Fan Single Pack (Black)
Corsair iCUE AF120 RGB ELITE 120mm PWM Fan (Black)
Corsair LL120 RGB 120mm Dual Light Loop PWM Fan Single Pack
Corsair ML120 LED ELITE Red Premium 120mm PWM Maglev Fan
Corsair AF120 ELITE 120mm PWM Fluid Dynamic Bearing Fan (White)
Corsair AF120 ELITE 120mm PWM Fluid Dynamic Bearing Fan (Black)









