| Model | Dynamic 3 12 Reverse White |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 350–2200 RPM |
| Max airflow | 64.95 CFM |
| Max pressure | 2.54 mmH₂O |
| Max noise | 35.8 dBA |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
White unlit reverse blade Dynamic 3 with 2200 RPM and 64.95 CFM for clean builds
More Fractal Design fans · All 120mm models · Browse the full fan database
About the Fractal Design Dynamic 3 12 Reverse White
The Dynamic 3 12 Reverse White is a 120 mm, 25 mm thick fan with a 350–2200 RPM range, 64.95 CFM airflow and 2.54 mmH2O static pressure. That combination suits buyers who need pressure to push air through filters, radiators or tight mesh rather than a pure open-case exhaust role, though the airflow figure is still substantial. Noise is rated up to 35.8 dB(A) at the top of the range, so expect the fan to be clearly audible at 2200 RPM and quieter toward the 350 RPM minimum.
Mounting is standard 120 mm with 25 mm thickness, and the 4-pin PWM connector means speed control comes from the motherboard header rather than a separate controller. There is no lighting, and the finish is white, which matters if you are matching a build. The manufacturer data does not list a price or release year, so check the retailer for current pricing. Confirm header availability and clearance before ordering.
Frequently asked questions
Is the Fractal Design Dynamic 3 12 Reverse White quiet?
Fractal Design rates it at up to 35.8 dB(A) at the 2200 RPM maximum. The 350 RPM minimum should be much quieter, but the data does not give a noise figure for lower speeds, so exact low-RPM loudness is not listed.
What is this fan best used for?
With 2.54 mmH2O static pressure and 64.95 CFM airflow, it is aimed at restricted paths such as filters, radiators and mesh panels where pressure matters. It is a 120 mm, 25 mm fan, so check your case or cooler clearance first.
Does it have RGB lighting and what connector does it use?
No, the data lists lighting as none, and the colour is white. It uses a 4-pin PWM connector, so it needs a PWM-capable motherboard header or fan controller for speed control. The data does not list a price.











