| Model | Dynamic 3 12 Reverse |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 350–2200 RPM |
| Max airflow | 65.38 CFM |
| Max pressure | 2.54 mmH₂O |
| Max noise | 36.2 dBA |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
Reverse blade Dynamic 3 fan with ARGB Gen 2 lighting for visible intake mounting
More Fractal Design fans · All 120mm models · Browse the full fan database
About the Fractal Design Dynamic 3 12 Reverse
The Dynamic 3 12 Reverse is a 120 mm, 25 mm thick ARGB fan rated from 350 to 2200 RPM. Its 65.38 CFM airflow and 2.54 mmH2O static pressure make it a balanced choice: the airflow figure suits open case ventilation, while the static pressure gives it enough push for restrictive filters, mesh or radiator fins. Buyers should treat it as a general-purpose fan rather than a pressure-optimised radiator specialist.
At full speed the rated noise is 36.2 dB(A), so expect audible operation at 2200 RPM and quieter running near the 350 RPM minimum. The 4-pin PWM connector allows speed control from a motherboard header, and the ARGB lighting needs an addressable RGB header or compatible controller. Mounting is standard 120 mm with 25 mm thickness, so check clearance in tight builds. The data does not list a price or release year.
Frequently asked questions
Is the Fractal Design Dynamic 3 12 Reverse quiet?
The rated noise is 36.2 dB(A) at maximum 2200 RPM, which is audible under load. Because it starts at 350 RPM via 4-pin PWM, you can run it slower for quieter operation, but the data does not list noise at lower speeds.
Is this fan better for case airflow or a radiator?
It is balanced. The 65.38 CFM airflow suits case ventilation, while 2.54 mmH2O static pressure helps against filters and mesh. The data does not specify radiator performance, so treat it as a general-purpose 120 mm fan.
Does the Dynamic 3 12 Reverse fit a standard 120 mm mount and what about ARGB?
Yes, it is a 120 mm fan with 25 mm thickness, a common size, though tight builds should check clearance. It uses a 4-pin PWM connector for speed control and ARGB lighting that requires an addressable RGB header or compatible controller.











