| Model | NF-A9 5V PWM |
|---|---|
| Size | 92 mm |
| Thickness | 25 mm |
| Speed range | –2000 RPM |
| Max airflow | 46.44 CFM |
| Max pressure | 2.28 mmH₂O |
| Max noise | 22.8 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM 5V |
| Lighting | None |
| Colour | Brown |
NF-A9 5V PWM: Five volt USB-powered version for non-PC cooling and DIY electronics
More Noctua fans · All 92mm models · Browse the full fan database
About the NF-A9 5V PWM
The NF-A9 5V PWM is a 92mm fan with 25mm thickness, so it suits compact cases and small coolers that take standard 92mm mounting. Its 2000 RPM ceiling produces 46.44 CFM of airflow alongside 2.28 mmH2O of static pressure. That balance means it can move air through open vents but also push through a dense heatsink or filter, where higher static pressure matters more than raw airflow.
Noise is rated at 22.8 dB(A) at maximum speed, so expect the loudest point only when the fan runs flat out. The SSO2 bearing is Noctua's own design, and the 4-pin PWM 5V connector means it needs a 5V PWM header rather than a standard 12V fan header. Colour is brown and there is no lighting. The data does not list a price or release year.
Frequently asked questions
Is the Noctua NF-A9 5V PWM quiet?
Noctua rates it at 22.8 dB(A) at its 2000 RPM maximum. That is the loudest figure in the data, so slower PWM speeds should run quieter, though the listing gives no lower-speed noise values.
What is the NF-A9 5V PWM best used for?
With 46.44 CFM airflow and 2.28 mmH2O static pressure, it suits 92mm case ventilation and heatsinks or filters where pressure matters. Its 25mm thickness fits standard 92mm mounts.
Does the NF-A9 5V PWM have RGB lighting?
No. The data lists lighting as none and the colour as brown. It uses a 4-pin PWM 5V connector, so check that your header supplies 5V rather than the usual 12V.















