| Model | AIR FAN P120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1500 RPM |
| Max airflow | 73 CFM |
| Max pressure | 1.71 mmH₂O |
| Max noise | 27 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
AIR FAN P120 is a 120 mm 25 mm black fan rated 600-1500 RPM 73 CFM and 1.71 mmH2O 27 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH AIR FAN P120 Fan
The MONTECH AIR FAN P120 is a 120mm, 25mm thick case fan running from 600 to 1500 RPM through a 4-pin PWM connector, so your motherboard can slow it down at idle and ramp it up under load. Its 73 CFM airflow figure points to a case-ventilation role, while the 1.71 mmH2O static pressure is modest, so it suits open case mounts better than dense radiators or thick filters. Montech rates noise at 27 dB(A) at maximum speed, which is a moderate figure rather than a silent one.
The fluid dynamic bearing is the durability-focused choice here, and the fan ships in black with no lighting, so it will not add RGB to a build. The standard 120mm by 25mm frame fits common case and cooler mounting points, and the 4-pin PWM header is the usual motherboard fan connector. The manufacturer data does not list a price or release year, so check the retailer for current pricing before deciding.
Frequently asked questions
Is the MONTECH AIR FAN P120 quiet?
Montech rates it at 27 dB(A) at its 1500 RPM maximum. Because it uses 4-pin PWM and starts at 600 RPM, you can run it slower for less noise, but the data does not list a noise figure for lower speeds.
Is the MONTECH AIR FAN P120 good for a radiator or CPU cooler?
Its 1.71 mmH2O static pressure is modest, so it is better suited to case airflow where the 73 CFM rating helps. For dense radiators or thick filters, the data suggests a higher static-pressure fan would be a better fit.
Does the MONTECH AIR FAN P120 have RGB lighting?
No. Montech lists the lighting as none and the colour as black, so this fan adds no illumination to a build. It connects through a standard 4-pin PWM header, and the data does not list a price or release year.















