| Model | RS120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –2100 RPM |
| Max airflow | 72.8 CFM |
| Max pressure | 4.15 mmH₂O |
| Bearing | Magnetic Levitation |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Budget friendly 120 mm fan with 4.15 mmH2O of pressure and single cable daisy chaining
More Corsair fans · All 120mm models · Browse the full fan database
About the Corsair RS120
The Corsair RS120 is a 120mm by 25mm fan built around a magnetic levitation bearing and a 4-pin PWM connector, so speed control comes from the motherboard rather than a fixed curve. Its 72.8 CFM airflow and 4.15 mmH2O static pressure at 2100 RPM put it in high-pressure territory, which suits radiators, heatsink fins and mesh-fronted cases where resistance is high. Buyers with open, low-restriction intakes may find the pressure capability beyond what they need.
Noise is not listed in the manufacturer data, so the decibel figure cannot be quoted here; the 2100 RPM ceiling suggests it can run fast when pushed, and PWM control lets you tune that down. Mounting follows standard 120mm spacing at 25mm thickness, and the 4-pin connector requires a PWM header. Lighting is none and the colour is black. Price and release year are not listed in the data.
Frequently asked questions
Is the Corsair RS120 a quiet fan?
The manufacturer data does not list a noise level in decibels, so a quiet rating cannot be confirmed. It reaches 2100 RPM and uses 4-pin PWM, which lets the motherboard lower speed and noise under lighter loads.
What is the Corsair RS120 best used for?
With 4.15 mmH2O static pressure and 72.8 CFM airflow at 2100 RPM, it suits high-resistance spots such as radiators, dense heatsinks and mesh-fronted cases. Low-restriction open intakes need less pressure than this fan provides.
Does the Corsair RS120 have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It is a plain black 120mm fan with a 4-pin PWM connector, so any lighting would have to come from other components in the build.















