| Model | SP120 ELITE |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 300–1300 RPM |
| Max airflow | 45.4 CFM |
| Max pressure | 1.23 mmH₂O |
| Max noise | 20.6 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Low cost static pressure fan with a 1300 RPM ceiling for budget AIO replacement use
More Corsair fans · All 120mm models · Browse the full fan database
About the Corsair SP120 ELITE
The Corsair SP120 ELITE is a 120 x 25 mm fan with a 4-pin PWM connector, so it can plug into a standard motherboard header and run anywhere from 300 to 1300 RPM. Its 45.4 CFM airflow and 1.23 mmH2O static pressure sit in a balanced range: it moves decent air for case ventilation, but the modest pressure figure means it is not a dedicated radiator or dense-heatsink specialist. Buyers should treat it as an all-round 120 mm fan rather than a high-pressure cooler fan.
Noise is rated at 20.6 dB(A), which suggests a quiet acoustic profile at the listed figure, though the data does not specify the RPM at which that number was measured. The hydraulic bearing is listed as the bearing type, and the fan is black with no lighting. Mounting follows the standard 120 mm, 25 mm-thick format, but the data does not list screw hole spacing, cable length, warranty, price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Corsair SP120 ELITE quiet?
Corsair rates it at 20.6 dB(A), which is a low noise figure on paper. The data does not state the RPM at which that measurement was taken, so expect louder operation toward the 1300 RPM maximum.
What is the Corsair SP120 ELITE best for?
With 45.4 CFM airflow and 1.23 mmH2O static pressure, it suits general case ventilation and airflow-focused builds. The modest pressure rating makes it less ideal for thick radiators or dense heatsinks.
Does the Corsair SP120 ELITE have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It is a plain black 120 mm fan with a 4-pin PWM connector and hydraulic bearing, with no RGB illumination.















