| Model | F120P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 73.47 CFM |
| Max pressure | 4.5 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Static pressure 120 mm fan with 4.5 mmH2O and no lighting for radiators and cooler use
More NZXT fans · All 120mm models · Browse the full fan database
About the NZXT F120P
The NZXT F120P is a 120mm by 25mm fan built around static pressure rather than raw open-air airflow. Its 4.5 mmH2O rating is the number that matters if you are pushing air through a dense radiator, a thick heatsink or a restrictive front panel, while the 73.47 CFM airflow figure shows it still moves a healthy volume of air in less obstructed mounts. The 500 to 2000 RPM range is PWM controlled through a 4-pin connector, so the board can dial it down at idle and ramp it up under load.
Noise is rated at 30 dB(A), which is best read as a maximum rather than a constant, since the figure is tied to the fan's operating range and the data does not state the exact test speed. The fluid dynamic bearing is a plus for long-term mounting in any orientation. It is a plain black fan with no lighting, so it suits builds where airflow matters more than looks. The data does not list a price or release year.
Frequently asked questions
Is the NZXT F120P a quiet fan?
NZXT rates it at 30 dB(A), which is the only noise figure the data provides. The listing does not state the speed at which that is measured, so expect the 2000 RPM maximum to be the loudest point and PWM control to lower it.
What is the NZXT F120P best used for?
With 4.5 mmH2O static pressure and 73.47 CFM airflow, it suits radiators, dense heatsinks and restrictive cases where pressure matters. In open, low-resistance mounting positions a lower-pressure fan may be enough.
Does the NZXT F120P have RGB lighting?
No. The data lists lighting as none and the colour as black, so it is a plain fan without illumination. Buyers wanting RGB effects would need to look at a different model in the range.















