| Model | FD-F-DR3-1401 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 350–1800 RPM |
| Max airflow | 76.3 CFM |
| Max pressure | 2.61 mmH₂O |
| Max noise | 30.8 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-pin PWM + 3-pin RGB |
| Lighting | ARGB |
| Colour | Black |
Dynamic 3 14 RGB is a 25 mm thick 140 mm fan reaching 1800 RPM with 76.3 CFM and 2.61 mmH2O static pressure
More Fractal Design fans · All 140mm models · Browse the full fan database
About the Fractal Design Dynamic 3 14 RGB Black 140mm Fan
The Dynamic 3 14 RGB Black balances airflow and pressure for a 140mm case fan. Its 76.3 CFM rating suits open case ventilation and rear or top exhaust, while the 2.61 mmH2O static pressure figure means it can also push through a mesh filter or a moderately dense heatsink without stalling. The 350 to 1800 RPM range lets you tune it down for near-silent idle and up when load demands it, with a listed maximum of 30.8 dB(A) at full speed.
At 25mm thick and 140mm across, it fits standard 140mm mounts, and the 4-pin PWM header handles speed control while the separate 3-pin RGB connector drives the ARGB lighting. A rifle bearing is specified for longevity, though the data does not list an MTBF figure or a warranty period. Price and release year are not included in the supplied data, so check the retailer listing for current pricing before buying.
Frequently asked questions
Is the Fractal Design Dynamic 3 14 RGB Black quiet?
Fractal Design lists a maximum noise of 30.8 dB(A) at the 1800 RPM top speed. Because the fan starts at 350 RPM, a PWM curve can keep it much slower and quieter at idle, though the data does not list noise at lower speeds.
Is this fan better for airflow or static pressure?
It offers both: 76.3 CFM airflow for open case ventilation and 2.61 mmH2O static pressure for pushing through mesh filters or heatsinks. That makes it a flexible 140mm choice rather than a pressure-only radiator fan.
What connectors does the Dynamic 3 14 RGB need?
It uses a 4-pin PWM connector for fan speed control plus a separate 3-pin RGB connector for the ARGB lighting. Your motherboard or controller needs both a PWM fan header and an addressable RGB header to use it fully.















