| Model | Momentum 14 |
|---|---|
| Size | 140 mm |
| Speed range | 350–1800 RPM |
| Max airflow | 79.79 CFM |
| Max pressure | 2.26 mmH₂O |
| Max noise | 31.9 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
| Released | 2025 |
140 mm LCP Momentum fan with 1800 RPM and 79.79 CFM for quiet high airflow builds
More Fractal Design fans · All 140mm models · Browse the full fan database
About the Fractal Design Momentum 14
The Momentum 14 balances airflow and pressure for a 140mm fan. Its 79.79 CFM airflow suits open case ventilation and low-restriction intake or exhaust positions, while 2.26 mmH2O static pressure is modest, so it is a better fit for unobstructed mounts than for dense radiators or thick filters. The 350 to 1800 RPM range lets you tune speed to the task.
At full 1800 RPM the rated noise is 31.9 dB(A), so expect audible airflow at maximum and quieter running at lower PWM duty. The 4-pin PWM connector requires a standard fan header with speed control. It uses a Fluid Dynamic Bearing, comes in black with no lighting, and is listed for 2025 release. The data does not list a price, warranty, or cable length, so confirm those with the retailer before ordering.
Frequently asked questions
Is the Fractal Design Momentum 14 quiet?
Its rated noise is 31.9 dB(A) at the 1800 RPM maximum. The 350 RPM minimum lets you run it slower through PWM for less noise, but the data does not list noise at lower speeds.
What is the Momentum 14 best used for?
With 79.79 CFM airflow and 2.26 mmH2O static pressure, it suits case intake and exhaust where resistance is low. Its pressure figure is modest, so dense radiators and heavy filters are not its strongest use.
Does the Momentum 14 have RGB lighting or need a special header?
No, the data lists no lighting, and the fan is black. It connects with a standard 4-pin PWM connector, so it needs a motherboard or controller fan header that supports PWM speed control.















