| Model | FD-F-DY3-1401 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 350–1800 RPM |
| Max airflow | 76.3 CFM |
| Max pressure | 2.61 mmH₂O |
| Max noise | 30.8 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Dynamic 3 14 is a 25 mm thick 140 mm fan reaching 1800 RPM with 76.3 CFM and 2.61 mmH2O static pressure
More Fractal Design fans · All 140mm models · Browse the full fan database
About the Fractal Design Dynamic 3 14 Black 140mm Fan
The Dynamic 3 14 balances airflow and pressure for a 140mm fan. Its 76.3 CFM rating suits open case ventilation and rear or top exhaust, while the 2.61 mmH2O static pressure figure means it can also push through a radiator or a dense dust filter without stalling. The 350 to 1800 RPM range lets you idle quietly and ramp up under load, and the 30.8 dB(A) maximum is the figure to expect at full speed rather than at low RPM.
Mounting follows the standard 140mm, 25mm-thick frame, so it fits the usual 140mm case and cooler positions. The 4-pin PWM connector requires a PWM-capable header or controller for speed control. A rifle bearing is listed for longevity, and there is no lighting, so the black frame stays unobtrusive. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Fractal Design Dynamic 3 14 Black 140mm quiet?
Fractal Design rates it at 30.8 dB(A) maximum, which is the noise at its 1800 RPM ceiling. Because the fan starts as low as 350 RPM, PWM control lets you run it well below that figure for quieter everyday operation.
Is this fan better for case airflow or a radiator?
It can serve both. The 76.3 CFM airflow suits case intake and exhaust, while the 2.61 mmH2O static pressure helps it move air through radiators and filters. Its 140mm size and 25mm thickness match standard mounts.
Does the Dynamic 3 14 have RGB lighting and what connector does it use?
No, the data lists no lighting, and the fan is black. It uses a 4-pin PWM connector, so it needs a PWM-capable motherboard header or fan controller to adjust speed across its 350 to 1800 RPM range.















