| Model | NF-A12x15 PWM chromax.black.swap |
|---|---|
| Size | 120 mm |
| Thickness | 15 mm |
| Speed range | –1850 RPM |
| Max airflow | 55.44 CFM |
| Max pressure | 1.53 mmH₂O |
| Max noise | 23.9 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
NF-A12x15 PWM chromax.black.swap: All-black chromax edition with swappable coloured anti-vibration pads
More Noctua fans · All 120mm models · Browse the full fan database
About the NF-A12x15 PWM chromax.black.swap
The NF-A12x15 PWM chromax.black.swap is a 120mm fan just 15mm thick, which makes it a fit for slim builds and tight clearances where a standard 25mm fan will not go. Its 1850 RPM ceiling produces 55.44 CFM of airflow against 1.53 mmH2O of static pressure, so it leans toward case ventilation and low-restriction airflow paths rather than dense radiators or thick heatsinks, where higher static pressure is usually wanted.
Noise is rated at 23.9 dB(A) at maximum speed, and PWM control on the 4-pin connector lets the board dial speed down for quieter running. The SSO2 bearing is the specified bearing type. The frame is black with no lighting. Mounting screws and any included accessories are not listed in the data, and the data does not list a price or release year, so check the retailer listing for those.
Frequently asked questions
Is the NF-A12x15 PWM chromax.black.swap quiet?
Noctua rates it at 23.9 dB(A) at its 1850 RPM maximum. Because it uses a 4-pin PWM connector, a compatible motherboard or controller can lower the speed for quieter operation, though the data does not list noise figures at reduced speeds.
What is the NF-A12x15 PWM chromax.black.swap best for?
At 15mm thick it suits slim cases and tight spaces. Its 55.44 CFM airflow and 1.53 mmH2O static pressure point to case ventilation and low-restriction airflow paths rather than dense radiators, where higher static pressure is typically preferred.
Does the NF-A12x15 PWM chromax.black.swap have RGB lighting?
No. The data lists lighting as none, and the colour as black. It is a 120mm fan with a 4-pin PWM connector and an SSO2 bearing, so there is no illuminated element to configure or power separately.















