| Model | NF-A12x25 LS-PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1200 RPM |
| Max airflow | 32.78 CFM |
| Max pressure | 0.82 mmH₂O |
| Max noise | 12.1 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Brown |
NF-A12x25 LS-PWM: Low-speed PWM version tuned for semi-passive and silence-first system builds
More Noctua fans · All 120mm models · Browse the full fan database
About the NF-A12x25 LS-PWM
The NF-A12x25 LS-PWM is a 120mm fan with 25mm thickness, so it fits standard 120mm case and cooler mounts. Its 1200 RPM maximum produces 32.78 CFM of airflow against 0.82 mmH2O of static pressure. That balance suits case ventilation and low-restriction heatsinks or radiators better than dense, high-impedance cooling stacks, where higher static pressure is usually preferred. Buyers should treat it as a general-purpose quiet fan rather than a pressure-optimised unit.
Noise is rated at 12.1 dB(A), which is the headline figure for anyone building a low-noise system. The SSO2 bearing and 4-pin PWM connector allow speed control from a compatible motherboard header, and there is no lighting, so the brown frame stays plain. The data does not list a price or release year, so check the retailer for current pricing. Confirm your mount accepts a 25mm-thick 120mm fan before ordering.
Frequently asked questions
Is the Noctua NF-A12x25 LS-PWM quiet?
Noctua rates this fan at 12.1 dB(A) at its 1200 RPM maximum, which is the only noise figure the manufacturer lists. Actual perceived noise depends on your system and how you set the PWM curve, so the data does not give a single real-world number.
What is the NF-A12x25 LS-PWM best used for?
With 32.78 CFM and 0.82 mmH2O static pressure at 1200 RPM, it suits 120mm case ventilation and low-restriction heatsinks or radiators. For dense radiators or tight intake filters that need more pressure, the data suggests a higher static-pressure fan may be a better fit.
Does the NF-A12x25 LS-PWM have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is brown. It uses a 4-pin PWM connector for speed control rather than any lighting header, so there is no RGB illumination to configure or sync with your motherboard software.















