| Model | NF-A12x25 PWM chromax.black.swap |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –2000 RPM |
| Max airflow | 60.09 CFM |
| Max pressure | 2.34 mmH₂O |
| Max noise | 22.6 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
NF-A12x25 PWM chromax.black.swap: All-black chromax edition with swappable coloured anti-vibration pads
More Noctua fans · All 120mm models · Browse the full fan database
About the NF-A12x25 PWM chromax.black.swap
The NF-A12x25 PWM chromax.black.swap is a 120mm fan with a 25mm thickness, so it fits standard 120mm case and cooler mounts. Its 2000 RPM maximum produces 60.09 CFM of airflow and 2.34 mmH2O of static pressure. That balance suits both open case ventilation and pressure-resistant spots such as heatsinks and radiators, where higher static pressure matters more than raw airflow.
Noise is rated at 22.6 dB(A), which tells you the fan is specified for quiet operation at its rated speed. The SSO2 bearing is the bearing type listed, and the 4-pin PWM connector means speed control comes from a PWM header on your board or controller. The frame is black and there is no lighting. The data does not list a price or release year, so check the retailer for current pricing before buying.
Frequently asked questions
Is the NF-A12x25 PWM chromax.black.swap quiet?
Noctua rates it at 22.6 dB(A) at its 2000 RPM maximum, so the spec sheet positions it as a quiet 120mm fan. Actual perceived noise depends on your speed setting and system, which the data does not cover.
Is this fan better for case airflow or for a radiator and heatsink?
It lists 60.09 CFM airflow and 2.34 mmH2O static pressure, so it is specified for both. The static pressure figure makes it suitable for pressure-resistant mounts like heatsinks and radiators, while the airflow figure covers case ventilation.
Does the NF-A12x25 PWM chromax.black.swap have RGB lighting, and what size does it fit?
No, the data lists lighting as none and the colour as black. It is a 120mm fan that is 25mm thick, so it fits standard 120mm fan mounts, and it uses a 4-pin PWM connector for speed control.















