| Model | NB-Multiframe M12-1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 0–700 RPM |
| Max airflow | 34.14 CFM |
| Max noise | 7.6 dBA |
| Connector | 3-pin |
| Lighting | None |
| Colour | Black |
More Noiseblocker fans · All 120mm models · Browse the full fan database
About the Noiseblocker NB-Multiframe M12-1 Fan
The NB-Multiframe M12-1 is a 120mm fan with a 25mm frame, so it fits standard 120mm mounting positions in cases and on coolers. Its 0–700 RPM range is deliberately low, and the airflow figure of 34.14 CFM reflects that. This is a low-noise airflow fan rather than a high static-pressure model, so it suits case ventilation and low-restriction heatsinks better than dense radiators or thick filters. Buyers chasing pressure for a radiator should look elsewhere in the range.
At a maximum of 700 RPM the rated noise is 7.6 dB(A), which is very quiet by the numbers, though the manufacturer data does not list a measured test setup. The fan uses a 3-pin connector, so it runs at full speed unless your board or controller varies voltage; there is no PWM control listed. Lighting is none and the colour is black. The data does not list a price or release year.
Frequently asked questions
Is the Noiseblocker NB-Multiframe M12-1 quiet?
The manufacturer rates it at 7.6 dB(A) at its 700 RPM maximum, which is a very low figure. Actual noise depends on your mounting and voltage control, and the data does not list a test setup.
Is this fan good for a radiator or a case?
Its 34.14 CFM airflow and 700 RPM ceiling point to case ventilation and low-restriction cooling rather than dense radiators. The data does not list a static-pressure value, so radiator use is not confirmed by the specs.
Does the NB-Multiframe M12-1 have RGB or PWM?
No. The data lists lighting as none and the connector as 3-pin, with no PWM control listed. Speed changes therefore depend on voltage control from your motherboard or fan controller.















