| Model | NB-Multiframe M12-2 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 0–1200 RPM |
| Max airflow | 51.21 CFM |
| Max noise | 16.4 dBA |
| Connector | 3-pin |
| Lighting | None |
| Colour | Black |
More Noiseblocker fans · All 120mm models · Browse the full fan database
About the Noiseblocker NB-Multiframe M12-2 Fan
The NB-Multiframe M12-2 is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounts. Its 1200 RPM ceiling and 51.21 CFM rating point to a moderate airflow design rather than a high static-pressure blower, making it a sensible choice for case ventilation and low-restriction heatsinks. Buyers pushing air through dense radiators or thick filters should weigh that airflow figure against their restriction. At 16.4 dB(A), the fan is specified as a quiet unit, though the data does not list a measured test setup or sound profile.
The 3-pin connector means speed control depends on the header or controller you use, and the data does not list PWM support. The fan has no lighting and comes in black. Minimum RPM is listed as 0, and the data does not state whether that reflects a stop mode or a start-up threshold. Price and release year are not listed in the provided data, so confirm those with the retailer before buying.
Frequently asked questions
Is the Noiseblocker NB-Multiframe M12-2 quiet?
The manufacturer lists 16.4 dB(A) for this fan, which is a low noise figure. The data does not include a test method or distance, so treat the number as a manufacturer specification rather than a measured result.
What is the NB-Multiframe M12-2 best used for?
With 51.21 CFM and a 1200 RPM maximum, it suits case ventilation and low-restriction cooling setups. The data does not list static pressure, so check that figure if you plan to use it on a dense radiator.
Does the NB-Multiframe M12-2 have RGB lighting?
No. The manufacturer lists lighting as none, and the fan colour is black. It uses a 3-pin connector, and the data does not list PWM support, so speed control depends on your header or controller.















