| Model | FHS60Z-D |
|---|---|
| Size | 60 mm |
| Thickness | 56 mm |
| Speed range | 1600–16000 RPM |
| Max airflow | 67.75 CFM |
| Max pressure | 128.67 mmH₂O |
| Max noise | 74.4 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 8-pin PWM |
| Lighting | None |
| Colour | Black |
60 mm double stack industrial fan rated to 16000 RPM with extreme static pressure
More SilverStone fans · All 60mm models · Browse the full fan database
About the SilverStone FHS60Z-D
The FHS60Z-D is built for pressure, not silence. Its 128.67 mmH2O static pressure is extremely high for a 60mm fan, which suits dense heatsinks, tight server ducts and high-impedance airflow paths where ordinary fans stall. Airflow is listed at 67.75 CFM, so it also moves meaningful volume, but the headline figure is pressure. Expect loud operation: the data lists 74.4 dB(A) at maximum, and the 1600–16000 RPM range means low-speed running is possible if your controller supports it.
Mounting needs care. The frame is 60mm wide but 56mm thick, far deeper than a standard 60mm fan, so check clearance around the heatsink and chassis. The connector is 8-pin PWM, not the common 4-pin header, so verify your board or controller compatibility before buying. The dual ball bearing suits continuous duty and hot environments. There is no lighting and the colour is black. The data does not list a price or release year.
Frequently asked questions
Is the SilverStone FHS60Z-D quiet?
No. The manufacturer lists 74.4 dB(A) noise, which is loud. The 1600–16000 RPM range allows lower speeds if your controller supports them, but the fan is designed for high-pressure cooling rather than quiet operation.
What is the FHS60Z-D best used for?
Its 128.67 mmH2O static pressure suits dense heatsinks, server ducts and restrictive airflow paths. The 67.75 CFM airflow figure means it also moves volume, but pressure is the reason to choose this 60mm fan.
Will the 8-pin PWM connector fit my motherboard?
The data lists an 8-pin PWM connector, not a standard 4-pin header, so check your motherboard or fan controller compatibility first. Also confirm clearance for the 56mm-thick frame, which is deeper than typical 60mm fans.















