| Model | NF-A6x15 FLX |
|---|---|
| Size | 60 mm |
| Thickness | 15 mm |
| Speed range | –3500 RPM |
| Max airflow | 13.77 CFM |
| Max pressure | 2.43 mmH₂O |
| Max noise | 19.8 dBA |
| Bearing | SSO2 |
| Connector | 3-pin FLX |
| Lighting | None |
| Colour | Brown |
NF-A6x15 FLX: Three-pin FLX version with Low-Noise Adaptors for selectable fixed speed settings
More Noctua fans · All 60mm models · Browse the full fan database
About the NF-A6x15 FLX
The NF-A6x15 FLX is a 60mm fan just 15mm thick, so it suits tight spaces where a standard 25mm fan will not fit. At 3500 RPM it moves 13.77 CFM with 2.43 mmH2O static pressure. That pressure figure is high for a fan this small, which points to use on heatsinks, dense fins or restrictive vents rather than open case exhaust where raw airflow matters more.
Noise is rated at 19.8 dB(A) at full speed, so expect an audible but modest hum rather than silence. The SSO2 bearing is Noctua's own design, and the 3-pin FLX connector means speed control depends on your header or the supplied low-noise adapters rather than PWM. Colour is brown and there is no lighting. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the NF-A6x15 FLX quiet enough for a small build?
Noctua rates it at 19.8 dB(A) at its 3500 RPM maximum, which is modest for a 60mm fan. Actual noise depends on your speed control and mounting, and the data does not list noise at reduced speeds.
What is the NF-A6x15 FLX best used for?
With 2.43 mmH2O static pressure and 13.77 CFM, it suits heatsinks, dense fins and restrictive vents in compact cases. Its 15mm thickness helps where a standard 25mm fan will not fit.
Does the NF-A6x15 FLX have RGB lighting?
No. The data lists lighting as none, and the fan colour is brown. It uses a 3-pin FLX connector rather than PWM, so speed control depends on your motherboard header or the included adapters.















