| Model | Air Penetrator 120i |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1350 RPM |
| Max airflow | 45.8 CFM |
| Max pressure | 1.08 mmH₂O |
| Max noise | 18 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 3-pin |
| Lighting | None |
| Colour | Black |
Air Penetrator 120 mm with a built in funnel grille and fixed 1350 RPM quiet airflow
More SilverStone fans · All 120mm models · Browse the full fan database
About the SilverStone Air Penetrator 120i
The Air Penetrator 120i is a 120mm by 25mm fan rated at 1350 RPM, moving 45.8 CFM at 1.08 mmH2O of static pressure. That balance suits case intake and exhaust and light obstruction such as a mesh front or a modest heatsink, while a buyer pushing through a dense radiator or thick filter should expect the 1.08 mmH2O rating to be the limiting figure. SilverStone lists 18 dB(A), so the fan is specified as a quiet option at its single 1350 RPM speed.
Mounting follows the standard 120mm 25mm format, and the 3-pin connector means speed control depends on the header or controller you attach it to rather than PWM. The hydraulic bearing is the stated bearing type, and the fan is black with no lighting. The data does not list a price or a release year, so check the retailer for current pricing before ordering.
Frequently asked questions
Is the SilverStone Air Penetrator 120i quiet?
SilverStone rates it at 18 dB(A) at its 1350 RPM maximum, which is the only noise figure the data provides. Actual perceived noise will depend on your case, mounting and how the 3-pin fan is powered.
Is the Air Penetrator 120i good for a radiator or a case fan?
With 45.8 CFM and 1.08 mmH2O, it is specified for airflow-focused case use and light obstruction. Dense radiators and thick filters demand higher static pressure than the listed 1.08 mmH2O.
Does the Air Penetrator 120i have RGB and what connector does it use?
No, the data lists lighting as none and the colour as black. It uses a 3-pin connector, so PWM control is not specified; speed is set by the header or controller you connect it to.















