| Model | TL-K12 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –2150 RPM |
| Max airflow | 69 CFM |
| Max pressure | 2.87 mmH₂O |
| Max noise | 27 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM, 5V |
| Lighting | ARGB |
| Colour | Black |
Stock fan of the Phantom Spirit EVO tuned for static pressure with S-FDB bearing and ARGB hub
More Thermalright fans · All 120mm models · Browse the full fan database
About the Thermalright TL-K12
The Thermalright TL-K12 is a 120mm by 25mm fan built for pressure rather than pure volume. Its 2.87 mmH2O static pressure rating at 2150 RPM makes it a sensible pick for heatsinks, radiators and dense mesh intakes where airflow alone struggles to push through restriction. The 69 CFM airflow figure means it still moves a healthy amount of air in open case positions, so it is not limited to radiator duty.
At full speed Thermalright rates the TL-K12 at 27 dB(A), so expect audible airflow rather than near-silent operation; PWM control lets you dial it down when load is low. The Fluid Dynamic Bearing is listed for long-term use, and the 4-pin PWM connector with 5V ARGB means your motherboard needs a matching ARGB header for lighting. Colour is black. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Thermalright TL-K12 quiet at full speed?
Thermalright rates it at 27 dB(A) at its 2150 RPM maximum. That is audible airflow rather than silent operation, but the 4-pin PWM connector lets you lower the speed when full cooling is not needed.
What is the TL-K12 best used for?
Its 2.87 mmH2O static pressure suits heatsinks, radiators and restrictive intakes, while 69 CFM of airflow keeps it usable in open case positions. It is a general 120mm pressure-oriented fan rather than a specialised part.
Does the TL-K12 fit a standard 120mm mount and how does ARGB connect?
It measures 120mm wide and 25mm thick, the common 120mm fan size, and uses a 4-pin PWM connector. Lighting is 5V ARGB, so your motherboard or controller needs a compatible 5V ARGB header.















