| Model | UNI FAN SL FLEX Reverse |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 350–2000 RPM |
| Max airflow | 65 CFM |
| Max pressure | 2.13 mmH₂O |
| Max noise | 31 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
| Released | 2026 |
Reverse blade SL FLEX for bottom and side intake with a 2000 RPM ceiling and 52 LEDs
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN SL FLEX Reverse
The Lian Li UNI FAN SL FLEX Reverse is a 120 mm fan with a 28 mm frame, so check that your case, radiator or cooler has clearance for the extra thickness before mounting. Its 350 to 2000 RPM range covers low-speed idle running and full-speed loads, while the 4-pin PWM connector lets a motherboard control speed directly. The 65 CFM airflow figure points to general case ventilation, and the 2.13 mmH2O static pressure is modest, so it suits open airflow positions more than dense radiators or heavily restricted intakes.
Lian Li rates noise at 31 dB(A), which is the figure to weigh against your tolerance for fan sound at higher speeds. The fluid dynamic bearing is listed as the bearing type, and ARGB lighting is included in the black finish. The data does not list a price, so cost is not covered here; the release year is given as 2026.
Frequently asked questions
Is the Lian Li UNI FAN SL FLEX Reverse quiet?
Lian Li lists noise at 31 dB(A) for this fan. That is the only noise figure in the data, and it does not state the speed at which it was measured, so treat it as the manufacturer rating rather than a guaranteed level at every RPM.
What is the Lian Li UNI FAN SL FLEX Reverse best for?
With 65 CFM airflow and 2.13 mmH2O static pressure, it fits case ventilation and low-restriction airflow positions. The static pressure is modest, so the data suggests it is less suited to dense radiators or heavily restricted intakes than to open airflow mounting.
Does the Lian Li UNI FAN SL FLEX Reverse have ARGB and PWM?
Yes. The data lists ARGB lighting and a 4-pin PWM connector, so speed control comes from a standard PWM header and lighting is addressable RGB. The black colour is the only colour listed, and no controller or hub is mentioned in the data.















