| Model | TY-121BP |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1800 RPM |
| Max airflow | 77.28 CFM |
| Max noise | 25 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Re released FDB fan from the TY cooler line with low impedance blades and 1800 RPM top speed
More Thermalright fans · All 120mm models · Browse the full fan database
About the Thermalright TY-121BP
The Thermalright TY-121BP is a 120mm fan with a 25mm frame, so it fits the standard 120mm case and cooler mounts. Its 600 to 1800 RPM range is controlled through a 4-pin PWM connector, letting the motherboard dial speed down for idle and up under load. At full speed the rated airflow is 77.28 CFM, which is strong for a 120mm fan and suits case ventilation and low-to-moderate restriction heatsinks better than dense radiators, where higher static pressure usually matters more.
Noise is rated at 25 dB(A), so expect a noticeable but modest hum near maximum RPM and quieter operation at the 600 RPM floor. The Fluid Dynamic Bearing is listed as the bearing type, and the fan is black with no lighting. The manufacturer data does not list a price, release year, static pressure, or included accessories, so confirm those with the retailer before ordering.
Frequently asked questions
Is the Thermalright TY-121BP quiet?
Thermalright rates it at 25 dB(A), with a minimum speed of 600 RPM and a maximum of 1800 RPM. Running it near the low end via PWM should keep noise down; the 25 dB(A) figure applies at its rated operating point.
What is the Thermalright TY-121BP best for?
With 77.28 CFM and no static pressure figure listed, it suits case airflow and lower-restriction heatsinks. For dense radiators, the data does not list static pressure, so check that specification before choosing it for push-pull cooling.
Does the Thermalright TY-121BP have RGB lighting?
No. The manufacturer data lists lighting as none and the colour as black. It uses a 4-pin PWM connector for speed control, and the data does not list any addressable or RGB header, so it is a plain black fan.















