| Model | Stratus 120 PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 200–1400 RPM |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
More Endorfy fans · All 120mm models · Browse the full fan database
About the Endorfy Stratus 120 PWM Fan
The Endorfy Stratus 120 PWM is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounting points. Its 200 to 1400 RPM range is controlled through a 4-pin PWM connector, letting the motherboard scale speed with load rather than running at a fixed rate. At the low end the fan can spin slowly for near-silent idle operation, while the 1400 RPM ceiling gives headroom for warmer conditions.
Because the data lists no static-pressure or airflow figures, buyers should treat this as a general-purpose case fan rather than a radiator-optimised unit. The 25mm thickness suits most builds, and the black frame with no lighting keeps it unobtrusive. Noise levels are not published, so expect typical behaviour for a 120mm fan at these speeds. Price and release year are not listed in the manufacturer data.
Frequently asked questions
Is the Endorfy Stratus 120 PWM quiet?
The manufacturer data does not list a noise figure, so a decibel rating cannot be confirmed. Its 200 RPM minimum speed does allow low-speed operation, which typically reduces noise compared with running at the 1400 RPM maximum.
What is the Endorfy Stratus 120 PWM best for?
With a 120mm diameter, 25mm thickness and 4-pin PWM control, it suits standard case ventilation and CPU cooler mounting. No static-pressure or airflow values are published, so radiator use is not specifically supported by the data.
Does the Endorfy Stratus 120 PWM have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It is a plain black 120mm PWM fan without illuminated or addressable RGB features, so it will not add lighting to a build.














