| Model | Light Wings 120mm PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1700 RPM |
| Max airflow | 41.5 CFM |
| Max pressure | 1.66 mmH₂O |
| Max noise | 20.6 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 5V 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
| Price | €25.50 |
Light Wings 120 mm PWM pairs 18 front and rear ARGB LEDs with a quiet 20.6 dB(A) 1700 rpm impeller
More be quiet! fans · All 120mm models · Browse the full fan database
About the Light Wings 120mm PWM
The Light Wings 120mm PWM is a 120 mm by 25 mm fan rated at 1700 RPM, moving 41.5 CFM with 1.66 mmH2O of static pressure. That balance suits airflow through a case as well as pushing air through a radiator or heatsink, though the modest static pressure figure means dense, restrictive cooling hardware is not its strongest setting. Buyers should treat it as an all-rounder rather than a pressure-optimised specialist.
Noise is listed at 20.6 dB(A), so expect a low sound signature at the rated speed. The fan uses a sleeve bearing and connects through a 4-pin PWM header plus a separate 5V 3-pin ARGB connector, so your motherboard or controller needs both. It is black and priced at 25.5 EUR. The data does not list a release year, warranty, or included accessories.
Frequently asked questions
Is the Light Wings 120mm PWM quiet?
be quiet! rates this fan at 20.6 dB(A) at its 1700 RPM maximum. That is the only noise figure the manufacturer lists, so actual perceived loudness will depend on your case, mounting and fan curve.
What is the Light Wings 120mm PWM best for?
With 41.5 CFM airflow and 1.66 mmH2O static pressure, it works for case airflow and moderate radiator or heatsink use. Its static pressure is modest, so very dense or restrictive cooling hardware may call for a pressure-focused fan.
Does the Light Wings 120mm PWM have RGB and what connectors does it need?
Yes, it has ARGB lighting. It uses a 4-pin PWM connector for fan control plus a separate 5V 3-pin ARGB connector for lighting, so your motherboard or ARGB controller must provide both headers. It is a 120 mm fan, 25 mm thick.















