| Model | Light Wings LX 140mm PWM |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | –1200 RPM |
| Max airflow | 56.0 CFM |
| Max pressure | 0.9 mmH₂O |
| Max noise | 22.9 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 5V 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
| Price | €19.90 |
Light Wings LX 140 mm brings 16 hub ARGB LEDs and a very low 22.9 dB(A) noise floor at 1200 rpm
More be quiet! fans · All 140mm models · Browse the full fan database
About the Light Wings LX 140mm PWM
The Light Wings LX 140mm PWM is a 140mm, 25mm-thick ARGB fan rated at 1200 RPM. Its 56.0 CFM airflow is the headline figure, while 0.9 mmH2O static pressure is modest, so it suits open case ventilation and low-restriction mesh or grille positions better than dense radiators or thick dust filters. Buyers pushing air through restrictive obstacles should weigh that pressure number carefully.
Noise is listed at 22.9 dB(A), so expect a relatively quiet fan at its rated speed, though the data does not specify the test distance or speed for that figure. Mounting uses standard 140mm 25mm-deep spacing, and the 4-pin PWM connector plus separate 5V 3-pin ARGB header means your motherboard needs an addressable RGB header for lighting control. The sleeve bearing is a simple, budget-oriented type. At EUR 19.9, the price is the main draw for an ARGB 140mm PWM fan.
Frequently asked questions
Is the Light Wings LX 140mm PWM quiet?
be quiet! lists 22.9 dB(A) for this fan, which is its only published noise figure. The data does not state the measuring distance or the speed at which that value was taken, so treat it as a manufacturer rating rather than a guaranteed in-case result.
Is this fan good for a radiator or a CPU cooler?
Its static pressure is 0.9 mmH2O, which is modest, while airflow is 56.0 CFM. That combination points to case ventilation and low-restriction mounting rather than dense radiators or heatsinks. The data does not list any radiator-specific ratings.
What connectors does the Light Wings LX 140mm PWM need?
It uses a 4-pin PWM connector for fan power and speed control, plus a separate 5V 3-pin ARGB connector for the lighting. Your motherboard or controller therefore needs an addressable RGB header. The fan measures 140mm across and 25mm thick.















