| Model | R4-120R-203C-R1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 650–2200 RPM |
| Max airflow | 59 CFM |
| Max pressure | 2.14 mmH₂O |
| Max noise | 31 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
Cooler Master MasterFan MF120R ARGB 3in1 delivers 59 CFM at up to 2200 RPM with 31 dBA noise on a 25 mm frame.
More Cooler Master fans · All 120mm models · Browse the full fan database
About the Cooler Master MasterFan MF120R ARGB 3in1
The MasterFan MF120R ARGB 3in1 uses 120mm by 25mm frames, so it fits standard 120mm case and radiator mounts. Its 650 to 2200 RPM range covers low-speed idle running and high-speed load running through 4-Pin PWM control. The 59 CFM airflow figure suits general case ventilation, while the 2.14 mmH2O static pressure figure gives it enough push for heatsinks and radiators where airflow alone is not the whole story.
Cooler Master rates noise at 31 dB(A), which is the top-end figure for this fan, so expect the loudest point at 2200 RPM rather than across the whole range. The Rifle Bearing is the listed bearing type, and ARGB lighting is included for addressable lighting setups. The data does not list a price or a release year, so those details are not covered here. Buyers should confirm their motherboard or controller supports the ARGB connection before buying the three-fan kit.
Frequently asked questions
Is the Cooler Master MasterFan MF120R ARGB 3in1 quiet?
Cooler Master lists noise at 31 dB(A), which is the rated maximum at 2200 RPM. The fan can run as low as 650 RPM via 4-Pin PWM, so lower speeds should be quieter, though the data does not give noise figures for those speeds.
What is the MasterFan MF120R ARGB 3in1 best for?
With 59 CFM airflow and 2.14 mmH2O static pressure, it is listed for both case ventilation and pressure-restricted spots such as heatsinks and radiators. The 120mm by 25mm size fits standard 120mm mounts.
Does the MasterFan MF120R ARGB 3in1 fit my case and motherboard?
It uses a standard 120mm diameter and 25mm thickness, so it fits mounts that accept 120mm fans. The 4-Pin PWM connector handles speed control, and the ARGB lighting needs a compatible addressable RGB header or controller, which the data does not specify.














