| Model | R4-C1DS-12FC-R1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1200–1200 RPM |
| Max airflow | 32 CFM |
| Max pressure | 0.7 mmH₂O |
| Max noise | 25 dBA |
| Connector | 3-Pin |
| Lighting | RGB |
Cooler Master MasterFan MF120L RGB delivers 32 CFM at up to 1200 RPM with 25 dBA noise on a 25 mm frame.
More Cooler Master fans · All 120mm models · Browse the full fan database
About the Cooler Master MasterFan MF120L RGB
The MasterFan MF120L RGB runs at a fixed 1200 RPM, so there is no PWM speed control here. It moves 32 CFM with 0.7 mmH2O of static pressure, which points to case ventilation and low-restriction mesh or open-frame mounting rather than dense radiators or thick dust filters, where higher pressure is usually wanted. Cooler Master rates it at 25 dB(A), a moderate figure for a 120mm fan at this speed.
The 120mm diameter and 25mm thickness are the common case-fan size, so it should fit standard rear and top mounts, though the data does not list a release year or price. The 3-Pin connector means it plugs into a standard chassis fan header and runs at full speed unless your board or controller adjusts voltage. RGB lighting is listed, but the data does not specify whether a controller or addressable header is required.
Frequently asked questions
Is the Cooler Master MasterFan MF120L RGB quiet?
Cooler Master rates it at 25 dB(A) at its fixed 1200 RPM. That is a moderate noise level for a 120mm fan, and because it is a 3-Pin fan without PWM control, it runs at full speed unless your header or controller lowers voltage.
Is the MF120L RGB good for a radiator or an air cooler?
Its 0.7 mmH2O static pressure and 32 CFM airflow suit case ventilation and low-restriction mounts. The data does not position it for dense radiators or thick filters, where higher static pressure is typically preferred.
What size case openings does the MF120L RGB fit, and how does it connect?
It is a 120mm fan that is 25mm thick, the standard case-fan size, so it fits typical 120mm rear and top mounts. It uses a 3-Pin connector for a standard chassis fan header.










