| Model | MFL-B2DN-183PA-R1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 650–1800 RPM |
| Max airflow | 47.2 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
Cooler Master MasterFan MF120 Halo 3in1 delivers 47.2 CFM at up to 1800 RPM with 30 dBA noise on a 25 mm frame.
More Cooler Master fans · All 120mm models · Browse the full fan database
About the Cooler Master MasterFan MF120 Halo 3in1
The MasterFan MF120 Halo 3in1 runs from 650 to 1800 RPM and moves 47.2 CFM at a rated 30 dB(A), so it sits in the middle ground between quiet case airflow and audible load performance. Its 1.6 mmH2O static pressure is modest, which points toward case ventilation and low-restriction mesh or open-frame mounting rather than thick radiators or dense dust filters. Buyers pushing air through a heatsink or radiator should weigh that figure carefully.
The 120mm diameter and 25mm thickness are the common case-fan size, and the 4-pin PWM connector lets a motherboard control speed across the full 650–1800 RPM range. The rifle bearing is the listed bearing type, and ARGB lighting is included. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Cooler Master MasterFan MF120 Halo 3in1 quiet?
Cooler Master rates it at 30 dB(A) at its maximum 1800 RPM. At the 650 RPM minimum it should be quieter, though the data does not list a separate noise figure for lower speeds.
Is this fan best for a radiator or for case airflow?
Its 1.6 mmH2O static pressure is modest, so it suits case ventilation and low-restriction mounting better than thick radiators or dense filters. The 47.2 CFM airflow supports general case cooling.
Will the 120mm size and 4-pin PWM connector fit my build?
It is a standard 120mm fan with 25mm thickness, so it fits common 120mm case and cooler mounts. The 4-pin PWM connector requires a motherboard PWM header for speed control.














