| Model | FD12R ARGB V2 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1700 RPM |
| Max airflow | 50.56 CFM |
| Max pressure | 1.18 mmH₂O |
| Max noise | 26.07 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
Second generation reverse blade ARGB fan with closed wheel design and a 1700 RPM ceiling
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FD12R ARGB V2
The DeepCool FD12R ARGB V2 is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounts. Its 50.56 CFM airflow and 1.18 mmH2O static pressure point to a balanced role: it moves a fair amount of air for case ventilation, but the modest pressure figure means it is a general-purpose fan rather than a radiator or dense-heatsink specialist. Buyers with thick radiators or tight mesh should weigh that number carefully.
At 500 to 1700 RPM, the rated noise is 26.07 dB(A), which suggests a moderate acoustic profile at the top end rather than a silent-fixed design. The 4-pin PWM connector allows speed control from a motherboard header, and the ARGB lighting needs an ARGB header or controller, which the data does not list as included. The hydraulic bearing is rated for long-life use, though the data does not list an MTBF figure, warranty, price or release year.
Frequently asked questions
Is the DeepCool FD12R ARGB V2 quiet?
DeepCool rates it at 26.07 dB(A) with a 500 to 1700 RPM range. That is a moderate noise figure at maximum speed, and PWM control lets you run it slower for less noise, though the data does not list noise at lower speeds.
What is the FD12R ARGB V2 best used for?
With 50.56 CFM airflow and 1.18 mmH2O static pressure, it suits general case ventilation and airflow-focused builds. The lower pressure figure makes it less ideal for thick radiators or dense heatsinks, where higher-pressure fans are usually preferred.
Does the FD12R ARGB V2 fit a standard 120mm mount and how is it powered?
It is a 120mm fan with a 25mm thickness, so it fits standard 120mm case and cooler mounts. Power and speed control use a 4-pin PWM connector, while the ARGB lighting requires a separate ARGB header or controller, which the data does not list as included.















