| Size | 120 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 500–2150 RPM |
| Max airflow | 75 CFM |
| Max pressure | 4.2 mmH₂O |
| Max noise | 32 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
DeepCool FT12 WH is a 120 mm 25 mm fan rated 500-2150 RPM with 75 CFM and 4.2 mmH2O at 32 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FT12 WH 120mm PWM Fan White
The DeepCool FT12 WH pairs 75 CFM of airflow with 4.2 mmH2O of static pressure, so it is built for resistance rather than open-air duty. That pressure figure suits heatsinks, radiators and dense mesh front panels, while the 75 CFM ceiling keeps it useful as a general case fan. The 500–2150 RPM range lets you idle quietly and ramp up under load, and the rated noise is 32 dB(A) at maximum speed.
Mounting follows the standard 120 mm by 25 mm format, so it fits common 120 mm case and cooler positions. The 4-pin PWM connector requires a PWM-capable header for speed control. The fluid dynamic bearing is the stated bearing type, and the white frame has no lighting. The data does not list a price, release year, warranty or included accessories, so confirm those with the retailer before ordering.
Frequently asked questions
Is the DeepCool FT12 WH quiet at full speed?
The manufacturer rates it at 32 dB(A), which is the maximum-speed figure. The 500 RPM minimum lets you run it slower for less noise, but the data does not list noise levels at intermediate speeds.
What is the FT12 WH best used for?
With 4.2 mmH2O static pressure and 75 CFM airflow, it suits heatsinks, radiators and restrictive front panels. Its 120 mm by 25 mm size also fits standard 120 mm case mounts.
Does the DeepCool FT12 WH have RGB lighting?
No. The data lists lighting as none, and the fan is white. Speed control comes through the 4-pin PWM connector, which needs a PWM-capable motherboard header or fan controller.















