| Model | Stratus 140 PWM ARGB |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 250–1200 RPM |
| Connector | 4-pin PWM + 5V 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
More Endorfy fans · All 140mm models · Browse the full fan database
About the Endorfy Stratus 140 PWM ARGB Fan
The Endorfy Stratus 140 PWM ARGB is a 140 mm fan with a 25 mm frame, so it fits standard 140 mm mounts and most cases that accept 25 mm thick fans. Its 250 to 1200 RPM range lets you run it slowly for near-silent idle airflow or push it to the top speed when load rises. With a 140 mm diameter and 1200 RPM ceiling, it suits case airflow and low-restriction heatsinks better than dense radiators, where higher static pressure is usually wanted. The data does not list an airflow or static pressure figure, so check those before buying for a radiator.
The 4-pin PWM connector lets a motherboard control speed automatically, while the separate 5V 3-pin ARGB header drives the lighting. Both headers must be available on your board or controller. The data does not list a noise level in decibels, so expect typical 1200 RPM fan noise at full speed rather than a quoted figure. The black frame and ARGB lighting suit dark builds. Price and release year are not listed in the data, so confirm them with the retailer.
Frequently asked questions
Is the Endorfy Stratus 140 PWM ARGB quiet?
The data does not list a decibel rating. It does list a minimum speed of 250 RPM, so PWM control can run it slowly for quieter operation, while 1200 RPM at full speed will be audible in most builds.
What is the Stratus 140 PWM ARGB best for?
With a 140 mm diameter and a 1200 RPM maximum, it suits case airflow and low-restriction cooling. The data does not list static pressure, so check that figure if you plan to mount it on a dense radiator.
What connectors does the Stratus 140 PWM ARGB need?
It uses a 4-pin PWM connector for fan speed control plus a separate 5V 3-pin ARGB connector for the lighting. Your motherboard or ARGB controller needs both headers for speed control and addressable lighting to work.














