| Model | Stratus 120 PWM ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 200–1400 RPM |
| Connector | 4-pin PWM + 5V 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
More Endorfy fans · All 120mm models · Browse the full fan database
About the Endorfy Stratus 120 PWM ARGB Fan
The Endorfy Stratus 120 PWM ARGB is a 120mm fan with a 25mm frame, so it fits the standard 120mm mounting pattern used by most cases and air coolers. Its 200 to 1400 RPM range is controlled through a 4-pin PWM header, letting the motherboard scale speed with load rather than running flat out. The wide low end suggests it can idle quietly, though the manufacturer data does not list an airflow, static pressure or noise figure, so those numbers cannot be confirmed here.
Because no static pressure value is published, buyers should treat it as a general case and airflow fan rather than a guaranteed radiator performer. The 5V 3-pin ARGB connector is separate from the PWM cable, so the board or controller needs an addressable RGB header to drive the lighting. Colour is black. Price and release year are not listed in the data, so check the retailer for current pricing.
Frequently asked questions
Is the Endorfy Stratus 120 PWM ARGB quiet?
The fan runs from 200 to 1400 RPM via 4-pin PWM, so it can spin slowly at idle. However, the manufacturer data does not list a noise level in decibels, so a specific quietness figure cannot be confirmed.
What is the Endorfy Stratus 120 PWM ARGB best for?
With a 120mm diameter and 25mm thickness it suits standard case mounting and CPU cooler positions. No static pressure figure is published, so radiator use is not confirmed by the data; treat it as a general airflow fan.
Does the Endorfy Stratus 120 PWM ARGB need a special RGB header?
Yes. It uses a 5V 3-pin ARGB connector for lighting, separate from the 4-pin PWM cable. Your motherboard or controller must have an addressable 5V 3-pin header; a standard 12V RGB header is not compatible.














