| Model | Lyra ARGB |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 750–1600 RPM |
| Max airflow | 70 CFM |
| Max pressure | 1.8 mmH₂O |
| Max noise | 35 dBA |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
More GELID Solutions fans · All 140mm models · Browse the full fan database
About the GELID Solutions Lyra ARGB 140mm Fan
The GELID Solutions Lyra ARGB 140mm is a 140mm by 25mm fan running from 750 to 1600 RPM. Its 70 CFM airflow is the headline figure, while 1.8 mmH2O static pressure is modest, so it suits open case ventilation and low-restriction mesh or grille positions better than dense radiators or thick dust filters. Buyers should treat it as an airflow-first fan rather than a pressure-optimised one.
At full speed the rated noise is 35 dB(A), which is audible, so the 750 RPM floor matters for anyone wanting quieter idle operation. The 25mm thickness fits standard 140mm mounts, and the 4-pin PWM plus 3-pin ARGB connector pair means the fan speed and lighting are controlled separately, so check your board has both headers. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the GELID Solutions Lyra ARGB 140mm quiet?
Its rated noise is 35 dB(A) at the 1600 RPM maximum, which is audible at full speed. The 750 RPM minimum gives you a lower-speed option, but the data does not list noise at that lower speed.
What is the Lyra ARGB 140mm best used for?
With 70 CFM airflow and 1.8 mmH2O static pressure, it fits case ventilation and low-restriction mesh or grille mounting. The modest pressure figure makes it less suited to dense radiators or thick filters.
Does the GELID Lyra ARGB 140mm fit a standard 140mm mount?
Yes, it is a 140mm fan with 25mm thickness, the common size for 140mm case and cooler mounts. It uses a 4-pin PWM connector plus a separate 3-pin ARGB connector, so your board needs both headers.














