| Model | AX120 PRO |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1600 RPM |
| Max airflow | 72.3 CFM |
| Max pressure | 1.85 mmH₂O |
| Max noise | 25.4 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
AX120 PRO is a 120 mm 25 mm black fan rated 600-1600 RPM 72.3 CFM and 1.85 mmH2O 25.4 dBA with ARGB lighting
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH AX120 PRO Fan
The MONTECH AX120 PRO is a 120mm by 25mm ARGB fan built around a 600 to 1600 RPM range. Its 72.3 CFM airflow figure points to a case-ventilation role, where moving air volume matters most, while the 1.85 mmH2O static pressure is modest and suggests it is less suited to pushing through dense radiators or restrictive filters. Buyers should weigh that balance against their own setup rather than assume one fan covers every job.
At a rated 25.4 dB(A), the AX120 PRO sits in a moderate noise band, so expect audible airflow near the top of its 1600 RPM ceiling and quieter running toward 600 RPM. It uses a sleeve bearing, a 4-pin PWM connector for speed control plus a separate 3-pin ARGB header for lighting, so your motherboard needs both. The 120mm diameter and 25mm thickness fit standard mounts. The data does not list a price or release year.
Frequently asked questions
Is the MONTECH AX120 PRO quiet enough for a low-noise build?
Montech rates the AX120 PRO at 25.4 dB(A) across its 600 to 1600 RPM range. That is a moderate figure, so it should be quieter at the 600 RPM minimum and more audible near 1600 RPM. The data does not specify the RPM at which noise was measured.
What is the MONTECH AX120 PRO best used for?
With 72.3 CFM airflow and 1.85 mmH2O static pressure, the AX120 PRO leans toward case ventilation and general airflow rather than high-resistance radiators or dense filters. Its 120mm size and 25mm thickness suit standard case and cooler mounting positions.
Does the MONTECH AX120 PRO need two motherboard headers?
Yes. The AX120 PRO uses a 4-pin PWM connector for fan speed control and a separate 3-pin ARGB connector for lighting. Your motherboard needs a PWM fan header plus an ARGB header, or a compatible controller, to run both functions.















