| Model | UF-RSLIN120-1W |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –2100 RPM |
| Max airflow | 63.6 CFM |
| Max pressure | 2.02 mmH₂O |
| Max noise | 32 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 3-Pin 5V ARGB |
| Lighting | ARGB |
| Colour | White |
SL Infinity 120 Reverse Blade intakes air through reversed blades while showing the infinity mirror
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN SL Infinity 120 Reverse Blade White
The Lian Li UNI FAN SL Infinity 120 Reverse Blade White is a 120mm, 25mm-thick ARGB fan rated to 2100 RPM with 63.6 CFM airflow and 2.02 mmH2O static pressure. That balance of airflow and pressure suits both open case ventilation and resistance such as radiators or dense filters, though the 2.02 mmH2O figure is moderate rather than extreme, so very thick or high-fin-density radiators may call for more pressure. The rated noise is 32 dB(A) at maximum speed, so expect audible operation near 2100 RPM and quieter running at reduced PWM duty.
Mounting uses standard 120mm 25mm spacing, and the fan connects by 4-Pin PWM for speed control plus a 3-Pin 5V ARGB header for lighting, so your motherboard or controller needs both. The fluid dynamic bearing is the stated bearing type. Colour is white, matching white builds. The manufacturer data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Lian Li UNI FAN SL Infinity 120 Reverse Blade White quiet?
Lian Li rates it at 32 dB(A) at its 2100 RPM maximum. That is an audible full-speed figure, so expect noticeable noise at 100 percent PWM and quieter results when you lower the duty cycle through the 4-pin PWM connector.
What is the Lian Li UNI FAN SL Infinity 120 Reverse Blade White best for?
With 63.6 CFM airflow and 2.02 mmH2O static pressure, it suits case ventilation and moderately restrictive setups like radiators or filters. The reverse blade design is intended for reversed airflow orientation, and the ARGB lighting adds white-themed visual matching.
What connectors and size does the Lian Li UNI FAN SL Infinity 120 Reverse Blade White need?
It is a 120mm fan, 25mm thick, so it fits standard 120mm mounts. It requires a 4-pin PWM header for fan speed and a 3-pin 5V ARGB header for the lighting, so confirm both are available on your motherboard or controller.














