| Model | UF-SL140V2-1W |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | –1600 RPM |
| Max airflow | 77.6 CFM |
| Max pressure | 2.09 mmH₂O |
| Max noise | 29 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | White |
UNI FAN SL140 V2 is a 25 mm thick 140 mm ARGB fan with 1600 RPM and 77.6 CFM for case airflow
More Lian Li fans · All 140mm models · Browse the full fan database
About the Lian Li UNI FAN SL140 V2 White
The Lian Li UNI FAN SL140 V2 White is a 140mm, 25mm-thick fan rated at 1600 RPM, delivering 77.6 CFM of airflow alongside 2.09 mmH2O of static pressure. That balance suits both open case ventilation and mildly restrictive filters or mesh, though buyers pushing through dense radiators or thick dust filters should weigh the static pressure figure against their specific restriction. The 29 dB(A) rating is the manufacturer's maximum-noise figure, so expect the fan to sit at or below that level when run slower via PWM.
Mounting follows standard 140mm spacing at 25mm thickness, and the 4-pin PWM connector handles speed control while a separate 3-pin ARGB header drives the lighting, so your motherboard or controller needs both. The fluid dynamic bearing is the stated bearing type. Colour is white. The manufacturer data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Lian Li UNI FAN SL140 V2 White quiet?
Lian Li rates it at 29 dB(A) maximum, which is the noise figure at its 1600 RPM ceiling. Running it slower through the 4-pin PWM connector should keep it at or below that rating, though the data does not list noise at lower speeds.
What is the SL140 V2 White best suited for?
With 77.6 CFM airflow and 2.09 mmH2O static pressure, it fits general case ventilation and light-restriction setups. The data does not specify radiator performance, so compare the static pressure figure against your own cooler or filter restriction before buying.
Does the SL140 V2 White need two headers?
Yes. It uses a 4-pin PWM connector for fan speed and a separate 3-pin ARGB connector for the lighting, so your motherboard or controller must provide both. The data does not list included adapters or a controller in the box.















