| Model | UF-SL120V2-1W |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | –2000 RPM |
| Max airflow | 64.5 CFM |
| Max pressure | 2.59 mmH₂O |
| Max noise | 29.2 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | White |
UNI FAN SL120 V2 is a 28 mm thick 120 mm ARGB fan reaching 2000 RPM and 64.5 CFM in a daisy chain cluster
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN SL120 V2 White
The Lian Li UNI FAN SL120 V2 White is a 120mm fan that is 28mm thick, so it sits slightly deeper than a standard 25mm fan and you should confirm clearance at your mounting point. Its 64.5 CFM airflow and 2.59 mmH2O static pressure at up to 2000 RPM make it a balanced choice: the pressure figure suits pushing air through a radiator or a dense mesh front, while the airflow figure keeps it usable as a case exhaust or intake.
Noise is rated at 29.2 dB(A) at maximum speed, so expect the fan to be audible when run flat out and quieter at lower PWM duty. The Fluid Dynamic Bearing is listed for long-term use. It connects by 4-Pin PWM for speed control plus a separate 3-Pin ARGB header for the white ARGB lighting, so your board needs both. The data does not list a price or release year.
Frequently asked questions
Is the Lian Li UNI FAN SL120 V2 White quiet at full speed?
Lian Li rates it at 29.2 dB(A) at its maximum 2000 RPM, so it will be audible at full tilt. Because it uses 4-Pin PWM, you can lower the duty cycle for quieter running, though the data does not list noise at reduced speeds.
Is this fan better for a radiator or as a case fan?
Its 2.59 mmH2O static pressure at 2000 RPM suits radiator and dense mesh use, while 64.5 CFM airflow keeps it viable as a case intake or exhaust. It is a balanced 120mm option rather than a pressure-only or airflow-only design.
What connectors and clearance does the SL120 V2 White need?
It needs a 4-Pin PWM header for fan control and a separate 3-Pin ARGB header for the lighting. It is 120mm wide but 28mm thick, so check that your case, radiator or mounting point has room for the extra depth.














