| Model | NF-F12 5V PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 54.97 CFM |
| Max pressure | 2.61 mmH₂O |
| Max noise | 22.4 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM 5V |
| Lighting | None |
| Colour | Brown |
NF-F12 5V PWM: Five volt USB-powered version for non-PC cooling and DIY electronics
More Noctua fans · All 120mm models · Browse the full fan database
About the NF-F12 5V PWM
The NF-F12 5V PWM is a 120mm fan with 25mm thickness, so it fits standard 120mm mounting positions. Its 1500 RPM ceiling produces 54.97 CFM of airflow alongside 2.61 mmH2O of static pressure. That pressure figure matters more than raw airflow if you are pushing air through a dense heatsink, radiator or filter, while the airflow figure suits open case ventilation. At full speed Noctua rates it at 22.4 dB(A), so expect a modest noise level rather than silence when it runs at maximum.
The SSO2 bearing is the moving-part specification Noctua lists, and the fan uses a 4-pin PWM connector rated for 5V operation, so confirm your header or adapter supplies that voltage rather than standard 12V. Lighting is listed as none and the colour is brown. The data does not list a price or release year, so check current retail listings for cost. Buyers wanting a brown 120mm PWM fan with published pressure and noise figures have the key numbers here.
Frequently asked questions
Is the Noctua NF-F12 5V PWM quiet?
Noctua rates it at 22.4 dB(A) at its 1500 RPM maximum. That is a modest noise figure rather than a silent one, and the data does not list noise at lower PWM speeds.
What is the NF-F12 5V PWM best used for?
With 2.61 mmH2O static pressure and 54.97 CFM airflow, it suits pressure-restricted spots such as heatsinks, radiators or filters, while the airflow figure also covers general 120mm case ventilation.
Does the NF-F12 5V PWM have RGB lighting?
No. The data lists lighting as none, and the fan colour is brown. It uses a 4-pin PWM connector rated for 5V, so check that your header or adapter matches that voltage.















