| Model | NF-A20 PWM |
|---|---|
| Size | 200 mm |
| Thickness | 30 mm |
| Speed range | 350–800 RPM |
| Max airflow | 86.46 CFM |
| Max pressure | 1.08 mmH₂O |
| Max noise | 18.1 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Brown |
NF-A20 PWM: Premium quiet cooling fan for cases CPU coolers and water-cooling radiators
More Noctua fans · All 200mm models · Browse the full fan database
About the NF-A20 PWM
The NF-A20 PWM moves 86.46 CFM at its 800 RPM maximum, which is a lot of air for a 200mm fan, while static pressure is listed at 1.08 mmH2O. That balance suits large case intake or exhaust slots where you want broad, low-speed airflow rather than pushing through dense radiators or thick filters, where higher static pressure matters more. Noise is rated 18.1 dB(A), and the 350 RPM minimum lets you run it slowly for quieter setups.
The 30mm thickness and 200mm diameter mean you need a case or mount that accepts this size, so check clearance before ordering. It uses a 4-pin PWM connector for speed control from the motherboard, an SSO2 bearing, and comes in brown with no lighting. The manufacturer data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Noctua NF-A20 PWM quiet?
Noctua rates it at 18.1 dB(A), and the 350 RPM minimum speed lets you run it slower for less noise. Actual noise depends on your case, mounting and fan curve, which the manufacturer data does not cover.
What is the NF-A20 PWM best used for?
With 86.46 CFM and 1.08 mmH2O static pressure at up to 800 RPM, it suits large case intake or exhaust positions needing high airflow at low speed. Dense radiators or thick filters may favour higher static pressure.
Does the NF-A20 PWM have RGB lighting?
No. The manufacturer data lists lighting as none and the colour as brown, so it is a plain brown fan without RGB. It connects via a 4-pin PWM header for motherboard speed control.















