| Model | CL-F179-PL20SW-A |
|---|---|
| Size | 200 mm |
| Thickness | 30 mm |
| Speed range | 500–900 RPM |
| Max airflow | 131.6 CFM |
| Max pressure | 1.92 mmH₂O |
| Max noise | 27.2 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
CL-F179-PL20SW-A is a 30 mm thick 200 mm ARGB fan reaching 900 RPM with 131.6 CFM and 1.92 mmH2O static pressure
More Thermaltake fans · All 200mm models · Browse the full fan database
About the Thermaltake CT200 ARGB Sync PC Cooling Fan
The CT200 ARGB Sync pairs a 200 mm diameter with a 30 mm thick frame, which is where its 131.6 CFM airflow figure comes from. That volume suits large open case panels and low-restriction intake positions where moving air matters more than pushing through dense fins. Static pressure is listed at 1.92 mmH2O, so for radiators or tightly packed filters expect less benefit than from a high-pressure fan. Speed runs from 500 to 900 RPM, and the rated noise is 27.2 dB(A) at the top end, so the fan should stay modest at lower settings.
Mounting needs a 200 mm fan position, and the 30 mm thickness is worth checking against clearance. The hydraulic bearing is the stated bearing type. Connection is a 4-Pin PWM header for speed control plus a separate 3-Pin ARGB connector, so the board needs both. Colour is black. The manufacturer data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Thermaltake CT200 ARGB Sync quiet?
The rated noise is 27.2 dB(A) at the maximum 900 RPM. The fan also runs as low as 500 RPM, so lower speeds should be quieter, though the data does not list noise at those settings.
What is the CT200 ARGB Sync best for?
With 131.6 CFM and 1.92 mmH2O static pressure, it suits large case intake or exhaust positions with low restriction. Its pressure figure is modest, so dense radiators are not its strongest use.
What connectors does the CT200 ARGB Sync need?
It uses a 4-Pin PWM connector for fan speed control and a separate 3-Pin ARGB connector for lighting. Your motherboard or controller needs both, and the fan fits 200 mm mounts at 30 mm thick.















