| Model | CT200 ARGB |
|---|---|
| Size | 200 mm |
| Thickness | 30 mm |
| Speed range | 500–900 RPM |
| Max airflow | 131.6 CFM |
| Max pressure | 1.92 mmH₂O |
| Max noise | 27.2 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
200 mm ARGB case fan with 131 CFM of airflow for wide quiet intake in full tower builds
More Thermaltake fans · All 200mm models · Browse the full fan database
About the Thermaltake CT200 ARGB
The Thermaltake CT200 ARGB is a 200 mm fan with a 30 mm thick frame, which gives it more room to move air than a slim 200 mm design. Its 131.6 CFM airflow rating is high, so it suits large cases where you want broad, low-speed coverage rather than focused pressure. Static pressure is listed at 1.92 mmH2O, which is modest, so buyers with dense radiators or heavily restricted front intakes should expect it to work best as a case fan rather than a radiator fan.
Speed runs from 500 to 900 RPM, and the rated noise is 27.2 dB(A), so the fan should stay fairly quiet at its lower end and only become noticeable near maximum. It uses a hydraulic bearing and a 4-pin PWM connector, so it needs a standard PWM header for speed control. Lighting is ARGB and the colour is black. The data does not list a price or release year.
Frequently asked questions
Is the Thermaltake CT200 ARGB quiet?
The rated noise is 27.2 dB(A), measured at the fan's specified operating range. With a 500 RPM minimum, you can run it slower for less noise, though the data does not list noise at individual speeds.
Is the CT200 ARGB good for a radiator or just case airflow?
Its 131.6 CFM airflow is high but static pressure is only 1.92 mmH2O, so it is better suited to case airflow than pushing through dense radiator fins or restrictive filters.
What size case opening does the Thermaltake CT200 ARGB need?
It is a 200 mm fan with a 30 mm thick frame, so it needs a 200 mm mounting position that clears 30 mm of depth. Check your case's fan clearance before buying.















