| Model | MFX-B3DN-08NP2-R1 |
|---|---|
| Size | 200 mm |
| Thickness | 25 mm |
| Speed range | –800 RPM |
| Max airflow | 102.8 CFM |
| Max pressure | 1.35 mmH₂O |
| Max noise | 15.7 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
| Colour | Black |
Cooler Master SickleFlow 200 ARGB delivers 102.8 CFM at up to 800 RPM with 15.7 dBA noise on a 25 mm frame.
More Cooler Master fans · All 200mm models · Browse the full fan database
About the Cooler Master SickleFlow 200 ARGB
The SickleFlow 200 ARGB is a 200 mm, 25 mm thick case fan rated at 800 RPM, which is a low-speed design aimed at moving a lot of air quietly. Its 102.8 CFM airflow is high for a fan this slow, so it suits large case intakes, side panels and spacious builds where volume matters more than pressure. Static pressure is listed at 1.35 mmH2O, a modest figure, so it is a better fit for open case airflow than for dense radiators or heavily restricted front panels.
Noise is rated at 15.7 dB(A), consistent with the 800 RPM ceiling, though the data does not list a minimum or starting voltage. The fan uses a sleeve bearing, a 4-pin PWM connector for speed control and ARGB lighting, and comes in black. Mounting hole spacing and cable length are not listed in the manufacturer data, so check your case's 200 mm support before buying. Price and release year are also not listed.
Frequently asked questions
Is the Cooler Master SickleFlow 200 ARGB quiet?
Cooler Master rates it at 15.7 dB(A) at its 800 RPM maximum, which is a low noise figure for a 200 mm fan. The data does not list a minimum speed or starting voltage, so actual noise at reduced PWM duty is not specified.
What is the SickleFlow 200 ARGB best used for?
With 102.8 CFM airflow and 1.35 mmH2O static pressure, it suits large case intakes and exhausts where open airflow matters. The modest pressure figure makes it less ideal for dense radiators or heavily restricted front panels.
Does the SickleFlow 200 ARGB fit my case and support ARGB?
It is a 200 mm fan that is 25 mm thick, so your case must support 200 mm mounts. It has a 4-pin PWM connector and ARGB lighting. Mounting hole spacing and cable length are not listed in the manufacturer data.















