| Model | NF-S12A FLX |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1200 RPM |
| Max airflow | 63.27 CFM |
| Max pressure | 1.19 mmH₂O |
| Max noise | 17.8 dBA |
| Bearing | SSO2 |
| Connector | 3-pin FLX |
| Lighting | None |
| Colour | Brown |
NF-S12A FLX: Three-pin FLX version with Low-Noise Adaptors for selectable fixed speed settings
More Noctua fans · All 120mm models · Browse the full fan database
About the NF-S12A FLX
The NF-S12A FLX pairs a 1200 RPM ceiling with 63.27 CFM of airflow, which points to a case-ventilation or exhaust role rather than a dense radiator. Its 1.19 mmH2O static pressure is modest, so buyers pushing air through thick fins or filters should weigh that figure carefully. At 17.8 dB(A) the fan is specified for low-noise builds, though the data does not list a minimum starting voltage or a noise figure at reduced speed.
Mounting follows standard 120mm spacing at 25mm thickness, and the 3-pin FLX connector means speed control depends on your header or a separate controller rather than PWM. The SSO2 bearing is the specified bearing type. Colour is brown with no lighting. The manufacturer data does not list a price or release year, so confirm those with the retailer before ordering.
Frequently asked questions
Is the Noctua NF-S12A FLX quiet enough for a bedroom PC?
Noctua rates the NF-S12A FLX at 17.8 dB(A) at its 1200 RPM maximum. The data does not list noise at lower speeds, so actual loudness depends on how you control the 3-pin FLX fan.
Is the NF-S12A FLX better for case airflow or a radiator?
Its 63.27 CFM airflow suits case intake and exhaust, while the 1.19 mmH2O static pressure is modest. For dense radiators or restrictive filters, the spec sheet suggests it is the weaker choice of the two roles.
Does the NF-S12A FLX have RGB lighting or a PWM connector?
No. The data lists lighting as none and the connector as 3-pin FLX, not 4-pin PWM. Speed control therefore relies on voltage control from your motherboard header or a separate fan controller.















