| Model | NB-Multiframe M8-2 |
|---|---|
| Size | 80 mm |
| Thickness | 25 mm |
| Speed range | 0–1700 RPM |
| Max airflow | 27.66 CFM |
| Max noise | 14.8 dBA |
| Connector | 3-pin |
| Lighting | None |
| Colour | Black |
More Noiseblocker fans · All 80mm models · Browse the full fan database
About the Noiseblocker NB-Multiframe M8-2 Fan
The NB-Multiframe M8-2 is an 80mm fan with a 25mm thickness, so it fits standard 80mm mounting positions in compact cases, small form factor builds and heatsinks. Its 1700 RPM maximum and 27.66 CFM airflow put it in a moderate airflow range for its size, which suits case ventilation and low-resistance heatsinks more than dense radiators or heavily restricted intakes where higher static pressure would be wanted. The minimum RPM is listed as 0, though the data does not state whether that reflects a full stop or a reporting floor.
At a rated 14.8 dB(A), the M8-2 is presented as a quiet option, and the 3-pin connector means speed control depends on the header or controller you use rather than PWM. The fan is black with no lighting. The data does not list a price or release year, so check current listings for cost.
Frequently asked questions
Is the Noiseblocker NB-Multiframe M8-2 quiet?
The manufacturer rates it at 14.8 dB(A) at its 1700 RPM maximum. That is the only noise figure listed, so actual loudness will depend on the speed your 3-pin header or controller supplies.
What is the NB-Multiframe M8-2 best used for?
With 27.66 CFM and 1700 RPM in an 80mm frame, it suits case ventilation and low-resistance heatsinks. Dense radiators or heavily restricted intakes typically call for higher static pressure than the data describes.
Does the NB-Multiframe M8-2 have RGB lighting?
No. The manufacturer lists lighting as none, and the fan colour is black. It uses a 3-pin connector, so it is not a PWM fan and speed control comes from your motherboard header or a separate controller.















