| Model | MFX-B8NN-25NPK-R1 |
|---|---|
| Size | 80 mm |
| Thickness | 25 mm |
| Speed range | 650–2500 RPM |
| Max airflow | 30 CFM |
| Max pressure | 2.75 mmH₂O |
| Max noise | 25 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-Pin PWM |
| Lighting | None |
Cooler Master SickleFlow 80 delivers 30 CFM at up to 2500 RPM with 25 dBA noise on a 25 mm frame.
More Cooler Master fans · All 80mm models · Browse the full fan database
About the Cooler Master SickleFlow 80
The SickleFlow 80 is an 80mm by 25mm fan rated for 650 to 2500 RPM, moving up to 30 CFM with 2.75 mmH2O of static pressure. That pressure figure is the standout number: it suits dense heatsinks, small radiators and restrictive front panels where a low-pressure fan would stall, while the 30 CFM ceiling is modest, so treat it as a focused airflow fan rather than a case-wide mover. At full speed Cooler Master rates it at 25 dB(A), so expect audible noise at 2500 RPM and a quieter result near the 650 RPM floor.
Mounting is standard 80mm spacing at 25mm thickness, and the 4-pin PWM connector lets a motherboard control speed across the full range. The Rifle Bearing is the stated bearing type, and the fan ships with no lighting. The data does not list a price, release year, included accessories or warranty terms, so check the retailer listing for those. Buyers should confirm their case or cooler accepts 80mm fans before ordering.
Frequently asked questions
Is the Cooler Master SickleFlow 80 quiet?
Cooler Master rates it at 25 dB(A), which is the figure at its 2500 RPM maximum. Because it is PWM controlled down to 650 RPM, you can run it slower for less noise, but the data does not list a separate noise rating for lower speeds.
What is the SickleFlow 80 best used for?
With 2.75 mmH2O static pressure and 30 CFM airflow, it fits restrictive spots such as dense heatsinks, small radiators or tight front panels. Its 80mm size and 25mm thickness suit compact cases and small form factor builds that cannot take larger fans.
Does the SickleFlow 80 have RGB lighting or a PWM connector?
The data lists no lighting for this SKU, MFX-B8NN-25NPK-R1, so it is a plain black fan without RGB. It does use a 4-pin PWM connector, allowing motherboard speed control from 650 to 2500 RPM. Price is not listed in the data.















